. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Here's a cautionary tale.

    My 3D printer was leaking plastic from one of the hotend heating blocks and when I dismantled for the clean and refit, I damaged the bit stuck in the ali block.
    It was a three piece all metal upgrade. As the nozzle was OK, I thought I would just buy the other bits. The cost was about £25 including shipping from USA, which was about £10 cheaper than the new kit from these guys :-

    https://www.technologyoutlet.co.uk/c...tal-hotend-kit

    However UK Customs added £7.39 and Royal Mail topped it up with a further £8 handling charge. Thus completely f***ing up the saving.

    I am justifiably mad with myself for being so daft, but it is a lesson learnt.

    I, of course, realised that this will be the case for all EU imports very soon, but it will be the least of the problems Brexit will bring.

    Have a better day tomorrow !

    Cheers,

    Rob
    Last edited by cropwell; 23-03-2017 at 12:11 AM.

  2. #2
    I no longer buy ANYTHING from the US because of this.
    Add to the fact that I have found that it takes just as long to get from the US as it does from China.
    John S -

  3. #3
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 3 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,908. Received thanks 360 times, giving thanks to others 8 times.
    £8 is one of the cheaper handling charges.
    Some are over £20. I'm pretty sure my last big shipment from China was a £25 handling charge, plus the customs fees.

    I'm sure at some point there will be a big crackdown on China mis-declaring customs forms.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  4. There is already a big crackdown on mis declaring costs and the EU is already pushing for this and threatened the UK with a large fine because of this.
    It will not be long before goods are impounded if found to be mis declaring the actual costs.
    At the end of the day it your obligation to pay VAT and duty on purchases in and outside of the EU, if you get away with it its a bonus, but dont complain if you dont.

  5. #5
    Quote Originally Posted by Gary View Post
    There is already a big crackdown on mis declaring costs and the EU is already pushing for this and threatened the UK with a large fine because of this.
    It will not be long before goods are impounded if found to be mis declaring the actual costs.
    At the end of the day it your obligation to pay VAT and duty on purchases in and outside of the EU, if you get away with it its a bonus, but dont complain if you dont.
    I am aware of this Gary, but I am still annoyed that Royal Mail add a handling charge amounting to about 50% of the cost of the goods. The whole conversion kit costs around £35 to £40 if bought in UK and I have ended up paying just over £40 for the heat transfer tube.

    Most of the bits I buy from China are low value electronics components, so don't attract customs attention as being under the small package limit. If Chinese exporters mis-declare goods, then it is not at my behest, and seized goods would become delivery failures and therefore eligible for refund.


    This printer bit could have been sent as a warranty replacement, as, even though I paid for it, that's what it should have been.

  6. The way i look at it is i should expect to get a bill for the VAT and Duty, and if i do, then there will be a fee for the shipper to clear it though customs on my behalf.

    I had a bill for £25 the other day and only £9 of that was the VAT and Duty the rest was royalmails fee, but if i were to try and clear it though customs myself, it would have cost me a lot more in time, and its a big headache doing it.
    The upside of this is that you may end up buying from a UK company in the future?



    Quote Originally Posted by cropwell View Post
    I am aware of this Gary, but I am still annoyed that Royal Mail add a handling charge amounting to about 50% of the cost of the goods. The whole conversion kit costs around £35 to £40 if bought in UK and I have ended up paying just over £40 for the heat transfer tube.

    Most of the bits I buy from China are low value electronics components, so don't attract customs attention as being under the small package limit. If Chinese exporters mis-declare goods, then it is not at my behest, and seized goods would become delivery failures and therefore eligible for refund.


    This printer bit could have been sent as a warranty replacement, as, even though I paid for it, that's what it should have been.

  7. #7
    Quote Originally Posted by m_c View Post
    £8 is one of the cheaper handling charges.
    Some are over £20. I'm pretty sure my last big shipment from China was a £25 handling charge, plus the customs fees.

    I'm sure at some point there will be a big crackdown on China mis-declaring customs forms.
    m_c You mention BIG shipment, what percentage of the initial cost of the goods was the handling charge, I bet it wasn't 45% as in my case.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 2
    Last Post: 16-08-2013, 06:40 PM
  2. Replies: 1
    Last Post: 23-02-2009, 09:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •