1. #1
    Hi all
    I'm having a few problems with my Hurco VMX60i milling machine
    I keep getting the following servo error codes regularly

    Z axis servo fault Code 2578
    Spindle servo fault Code 2578
    X axis servo fault Code 2578
    Y axis servo fault Code 2578

    All four error codes appear at the same time
    I can reset the servo and spindle on the control but it keeps happening on a regular basis

    Any help would be much appreciated


  2. I would suggest you should be talking to Hurco.....I'm sure you know to find them with a machining centre like that

Similar Threads

  1. Nc studio fault codes
    By charlieuk in forum Machine Control Software
    Replies: 0
    Last Post: 14-02-2017, 02:13 AM
  2. eBay: SEM SERVO MOTOR SEM MT30 U4-48, LAMBDA psu,s, 160v servo drive
    By deisel in forum Items On eBay UK
    Replies: 0
    Last Post: 29-01-2015, 08:55 AM
  3. G codes
    By ptjw7uk in forum Programmers Corner
    Replies: 3
    Last Post: 23-09-2013, 03:10 AM
  4. Difference between Mazatrol and G-codes
    By hoezap in forum Mazak, Yamazaki Machines
    Replies: 4
    Last Post: 21-06-2013, 11:15 PM
  5. Stepper Motor Wire Colour Codes
    By c cunningham in forum Stepper & Servo Motors
    Replies: 14
    Last Post: 26-01-2011, 02:13 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts