PCB Milling reccomendations

[A_Camera]

This is the attitude that I like to hear! I have discussed a hand mill with colleagues and due to the parameters that we would have to work with wouldn't be an option, nobody here would trust themselves eyeballing the depth going through the PCB.

As for holding the chip in place as we will be destroying the board regardless, I am thinking of cutting the chip out from the board so it will sit flat on its back and some sort of adhesive to hold it down.

You mentioned about being able to CNC it within budget, would this be with the chinese cnc machines found on ebay?

Thanks for the reply.

Grate! Good luck.