. .
  1. #1
    Hi guys,

    In the continuing saga to build a CNC machine based on the Solsylva plans (not from wood but now in aluminium extruded section - thanks everyone for the steer ) I'm now trying to find a UK source for XL timing pulley's and belts. I've contacted a couple of companies for prices but they seem slow to respond. Pulleys are double flanged, with hub 15-tooth and belt is 2100mm approx, 414 teeth. Does anyone know of a good supplier of these items?

    Mike C

  2. #2
    Surprisingly, good old Radio Spares

    Usually expensive they seem to have a bargain basement and choice when it comes to XL pullets and belts

  3. #3
    Even cheaper if you swap to the HDT series [ or is it HTd ] ?

    I buy all mine from there, never found anywhere any cheaper.

    plenty of people have said they have but when I've rung up by the time you add shipping [ RS is free if web ordered ] they work out dearer.
    John S -

  4. #4
    Yup. Link.

  5. #5
    Hi Guys,

    Thanks for all the suggestions. I've managed to find 2 suppliers for the XL pulleys - Medway Power Transmissions and Lakeland Power Transmissions. Works out to about £13 including carriage for 3 aluminium double flanged pulleys with hub pilot bored (so I can drill out to the size I want). Just trying to track down an 82" long XL pulley belt now! :wave:

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Ballscrews - pulleys - timing belts
    By vre in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 15-01-2014, 08:03 PM
  2. Belts & pulleys,
    By jcb121 in forum Belt Drive, Pulleys & Timing
    Replies: 4
    Last Post: 29-09-2012, 12:32 AM
  3. Belts and pulleys calculators
    By mocha in forum Belt Drive, Pulleys & Timing
    Replies: 0
    Last Post: 26-07-2012, 02:52 PM
  4. pulleys and belts - sizes
    By mocha in forum Belt Drive, Pulleys & Timing
    Replies: 3
    Last Post: 22-07-2012, 05:16 PM
  5. Advice: Timing Pulleys and Belts
    By Mad Professor in forum Belt Drive, Pulleys & Timing
    Replies: 7
    Last Post: 24-06-2012, 12:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •