Problems with my CNC using Mach3 with a Sunfar E300 Inverter

[Malcolm]

My CNC has been working very well, and suddenly stopped. Initially I thought the cause was a loose connection with the USB. I solved that, but now I cannot get the Router to work. Everything else is 100%OK. X,Y & Z all perform as required, however the actual Router is not spinning. Mach3 also indicates the expected router speed.but then nothing !!

I live in the Bristol area, and am seeking a "Hobby" Engineer, who I could seek support from. Does anyone have any suggestions to help me.

In anticipation .... thank you

[Clive S]

Hi Malcolm and welcome to the forum.
It would help if you supplied some more details and some pics of the machine is the router (spindle) connected via a VFD etc

[Malcolm]

Clive, My problem is my age (80) and not clever with anything electrical !!. I will collect all the info I have, and post in the next 24 hours.
MANY THANKS
Malcolm

[Malcolm]

Clive, My problem is my age (80) and not clever with anything electrical !!. I will collect all the info I have, and post in the next 24 hours.
MANY THANKS
Malcolm

[Malcolm]

Clive, as promised here are 2 photos of my machine a GX 6060, that Imported from China. In addition I attach photos of all the items installed.

I am not sure what other questions you want answered, but ask, and I will try to answer
Best wishes, Malcolm