1. #1
    Forgive me if this has been answered before, but i'll be damned if I can find it in the archive...

    I am playing around with Mach3 Turn having just modified my little Hobbymat Lathe.

    I wanted to calibrate x & z so as advised somewhere on the net loaded up the mill screen set in Mach3 (R3.043)

    It calibrated just fine but now I want to go back to the standard Mach3 Turn screen set and there isn't one or having searched high and low in the mach3 directories I cannot find it.

    Any clues on how I get it back to standard/default?

  2. #2

    Typical as soon as I ask a question I solve it myself and it's always obvious if a little hidden.

    Turns out that there are different file types so when in Mach3 and trying to load a screen set you can choose "Mill Files *.SET or Turn Files *.lset etc

    Easy when you use your eyes and click finger...

Similar Threads

  1. Ger21's UCCNC 2017 Screenset Preview/Introduction
    By Lee Roberts in forum UCCNC Software
    Replies: 0
    Last Post: 28-12-2016, 05:35 PM
  2. Mach Turn
    By Kai in forum CAD & CAM Software
    Replies: 5
    Last Post: 02-08-2016, 01:40 PM
  3. MACH 3 2010 Screenset Zeroing Macros
    By Washout in forum Artsoft Mach
    Replies: 5
    Last Post: 12-01-2014, 12:15 PM
  4. Replies: 34
    Last Post: 11-06-2012, 01:44 PM
  5. LED not turn on
    By Awel in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 06-12-2011, 05:59 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts