1. #1
    Does anyone know where I could get a set of new cables made up for a Chinese CNC Machine? I'm hoping to find somewhere that will make the cables up for me as I am no good at soldering!

  2. #2
    Hi Paul,

    Welcome to the forum, inbox (PM) me with what you need as I may be able to help.

    Lee
    .Me

  3. #3
    Thanks Lee, I'll have to remove the old cables tomorrow so that I can measure the length of them, what sort of cable would you use? I've read that shielded seems to be the best option? (Not that I know what that means) The existing cable says 4x0.5mm, I don't know much about connections either would photos of them be enough?
    Last edited by Paul B; 23-04-2017 at 10:06 PM.

  4. #4
    Quote Originally Posted by Paul B View Post
    Thanks Lee, I'll have to remove the old cables tomorrow so that I can measure the length of them, what sort of cable would you use? I've read that shielded seems to be the best option? (Not that I know what that means) The existing cable says 4x0.5mm, I don't know much about connections either would photos of them be enough?

  5. #5
    I've realised that once the connectors are soldered on the end of the cables, I won't be able to thread the cables into the cable chains :-(
    so it looks like I'm going to have to end up practising my soldering & do it myself :-(

  6. #6
    Quote Originally Posted by Paul B View Post
    I've realised that once the connectors are soldered on the end of the cables, I won't be able to thread the cables into the cable chains :-(
    so it looks like I'm going to have to end up practising my soldering & do it myself :-(
    Just found out the cable chains actually open up to put the cables in :-)
    So hopefully back to plan A of getting the cables made up :-)

    I'll message you the details Lee

  7. #7
    No problem just about to read your PM.

    :)
    .Me

Similar Threads

  1. Control box wiring: cables, terminals, connectors etc.
    By eurikain in forum General Electronics
    Replies: 10
    Last Post: 07-11-2015, 06:34 PM
  2. FOR SALE: Pack of Omron servo drivers + cables
    By albertoro in forum Items For Sale
    Replies: 0
    Last Post: 25-01-2015, 11:19 AM
  3. IDC26F to DB25M Cables
    By deisel in forum Computer Hardware
    Replies: 4
    Last Post: 09-09-2014, 03:50 PM
  4. Which cables to shield?
    By andy586 in forum General Electronics
    Replies: 0
    Last Post: 02-07-2014, 03:33 PM
  5. USB repeater cables
    By Web Goblin in forum General Discussion
    Replies: 0
    Last Post: 21-05-2011, 11:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •