1. #1
    I am looking for a v groove bit 10mm or 12mm (larger if pssible) x 90 degree v bit for cnc, I have a kress spindle max shank diameter is 8mm, I can find lots with a 1/2 in shank, no luck with 8mm shank, I have had the cheap ones before and finish was poor, so went back to smaller bits, I now need larger bit again.

    Any help appreciated

    BTW As I am in UK seller in UK would be great, any recomention would be helpful
    Last edited by etched4u; 29-04-2017 at 04:49 PM.

  2. #2
    Hi,

    I'm Snr Tech in a secondary school with two Boxford routers. I order Trend cutters with 1/4" shank from Miles Tools:
    https://www.mtmc.co.uk/Routing--Tool...-105-4927.aspx

    Hope that helps,

    Carol :)

Similar Threads

  1. Cheap 3D Printer Recommendation
    By Tenson in forum 3D Printing Machines
    Replies: 41
    Last Post: 21-05-2017, 05:02 AM
  2. V-Groove Bit Recommendation?
    By Tenson in forum General Discussion
    Replies: 7
    Last Post: 05-02-2016, 04:42 PM
  3. where do you get the v groove channel extrusions from
    By nobby in forum Marketplace Discussion
    Replies: 1
    Last Post: 29-04-2014, 04:19 PM
  4. Spindle Motor Recommendation.
    By cambesol in forum Marketplace Discussion
    Replies: 0
    Last Post: 21-11-2013, 12:15 PM
  5. Router recommendation for University
    By S2L in forum Marketplace Discussion
    Replies: 12
    Last Post: 05-12-2012, 11:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •