1200mmX900mmX170mm 4axis cnc

[AndyUK]

Hi Nick,

I'm still learning, but some of the best bed frame designs I've seen have a bed which attaches to the legs with screws, so you can change the height of the bed, or swap it out for a different one in the future. The other thing I thought was quite sensible would be room at the front and sides for sliding large pieces in underneath to work on their edges - looks like you've hit the nail on head already for that one though!

Hope that helps!

[Nickhofen]

Hi Nick,

I'm still learning, but some of the best bed frame designs I've seen have a bed which attaches to the legs with screws, so you can change the height of the bed, or swap it out for a different one in the future. The other thing I thought was quite sensible would be room at the front and sides for sliding large pieces in underneath to work on their edges - looks like you've hit the nail on head already for that one though!

Hope that helps!

Hi Andy.
Somehow I miss your post earlier.
Thanks for the comments, I read other's guys threads here and I am stealing ideas, I hope this is not inappropriate. :-).
Something I forgot to mention is that at the one end of the bench ,that is at a lower lever is for the rotating axis.