Page 10 of 32 FirstFirst ... 8910111220 ... LastLast
  1. #91
    Welding time!
    Workshop is so small even with the extension, that I can not take a full photo of the cnc table,lol , behind me you can see the old wall,it is where are the bricks, the extension is behind it where the blue curtain is.
    80x80mm square tubes were used, for bracing I am going with 50x50mm.
    Click image for larger version. 

Name:	25463693_2006977816250207_1154018456_n.jpg 
Views:	108 
Size:	67.3 KB 
ID:	23454

  2. #92
    Haha go go weldmaster :D

    You will soon have use of all planning!
    Lets not have a race.. have a feeling you will be ready before me ;)

    Skickat från min SM-G955F via Tapatalk

  3. #93
    No way!!! I have no motors, spindle ,not catted the alu plates etc....So, no way! hahaha!!!

  4. #94
    Does any one have a good supplier for 2.2kw VFD spindle ? And 4nm nemma 23 motors with 8 cables?

  5. #95
    Anyone?

  6. #96
    4nm motors can be bought from cnc4you.co.uk or zapp automation :) those motors have good specs compared to ebay versions.. the ebay motors usually have high inductance.

    Spindle + vfd seems more like a gamble..
    Same sellers often ship different quality. Sometimes 3 bearings sometimes 4.
    Sometimes with connected earth sometimes without.
    No tips for you here....

    Skickat från min SM-G955F via Tapatalk

  7. The Following 2 Users Say Thank You to Nr1madman For This Useful Post:


  8. #97
    Thanks Robert, so the spindle guestion is still a mystery,lol!

  9. #98
    Quote Originally Posted by Nickhofen View Post
    Thanks Robert, so the spindle guestion is still a mystery,lol!
    Yes, i have bought two of these, one was really smooth and the other sounded like it was out of balance somewhere. Its 50/50 what you get but they are cheap.

  10. #99
    Quote Originally Posted by Davek0974 View Post
    Yes, i have bought two of these, one was really smooth and the other sounded like it was out of balance somewhere. Its 50/50 what you get but they are cheap.
    Thanks Dave,I will pull the trigger and buy a Chinese one and see what happen!
    Last edited by Nickhofen; 21-12-2017 at 02:08 PM.

  11. #100
    Quote Originally Posted by Nickhofen View Post
    Thanks Dave,I will pull the trigger and buy a Chinese one and see what happen!
    Try this https://www.ebay.co.uk/itm/2-2KW-WAT...8AAOSw-W5Us1mz
    ..Clive
    The more you know, The better you know, How little you know

Page 10 of 32 FirstFirst ... 8910111220 ... LastLast

Similar Threads

  1. cnc 4axis hot wire mach3;
    By maikonesk in forum Hotwire Cutting Machines
    Replies: 3
    Last Post: 07-08-2015, 02:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •