. .
Page 14 of 35 FirstFirst ... 4121314151624 ... LastLast
  1. #131
    Put the rails on the aluminium extrusions and run the caliper.
    Click image for larger version. 

Name:	27994794_2038994403048548_703194193_n.jpg 
Views:	193 
Size:	85.5 KB 
ID:	23742
    Click image for larger version. 

Name:	27934986_2038994359715219_1376046079_n.jpg 
Views:	219 
Size:	97.5 KB 
ID:	23743

  2. #132
    I'm going to glue 2 T nuts together so they can't twist in the slot for my clamps to make it easier to release, move and retighten.

    Is that M6 thread with a 10mm slot?
    Last edited by Desertboy; 11-02-2018 at 08:29 PM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

  3. The Following User Says Thank You to Desertboy For This Useful Post:


  4. #133
    Quote Originally Posted by Desertboy View Post
    I'm going to glue 2 T nuts together so they can't twist in the slot for my clamps to make it easier to release, move and retighten.
    Smart stuff ;)

    Or you can just buy the longer ones?
    They cant be "dropped down" but thats true if you glue two aswell

    Skickat från min SM-G955F via Tapatalk

  5. #134
    Quote Originally Posted by Nr1madman View Post
    Good to hear you solved the problem!
    Its frustrating when you get parts that dont follow the specs ;)

    Skickat från min SM-G955F via Tapatalk
    Thanks Robert.
    Yes it is frustrating but the sooner you calm, improvise and adapt you can solve the problem, it took me one whole day!

  6. #135
    Quote Originally Posted by Desertboy View Post
    I'm going to glue 2 T nuts together so they can't twist in the slot for my clamps to make it easier to release, move and retighten.

    Is that M6 thread with a 10mm slot?
    Those are M6 with 8mm slot, they was suppose to be 19.5mm but actually they are 19.28mm.

  7. #136
    Quote Originally Posted by Desertboy View Post
    I'm going to glue 2 T nuts together so they can't twist in the slot for my clamps to make it easier to release, move and retighten.

    Is that M6 thread with a 10mm slot?
    Why didn't you write that yesterday???

  8. #137
    If you have a router table make them yourself that's my plan if I ever need to mount hiwin's again with extrusion.

    But if you need more I can get them from KJN and post them to you for cost I'm 3 miles (4km) away from them and need to go for more T nuts this week for my clamps so it;s no hassle.

    They're £4 for 10 I needed 100 for my hiwin's so I bitterly know this lol.

    Click image for larger version. 

Name:	kjn.jpg 
Views:	219 
Size:	89.7 KB 
ID:	23744

    Took this in their entrance, this would cost stupid money lol. Extrusion is not cheap.
    Last edited by Desertboy; 11-02-2018 at 08:48 PM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

  9. The Following User Says Thank You to Desertboy For This Useful Post:


  10. #138
    Quote Originally Posted by Desertboy View Post
    If you have a router table make them yourself that's my plan if I ever need to mount hiwin's again with extrusion.

    But if you need more I can get them from KJN and post them to you for cost I'm 3 miles (4km) away from them and need to go for more T nuts this week for my clamps so it;s no hassle.

    They're £4 for 10 I needed 100 for my hiwin's so I bitterly know this lol.

    Click image for larger version. 

Name:	kjn.jpg 
Views:	219 
Size:	89.7 KB 
ID:	23744

    Took this in their entrance, this would cost stupid money lol. Extrusion is not cheap.

    Thanks mate,that is very kind of you, I appreciate it.
    For now I am good but I will keep in mind your offer, thanks again!!!

  11. #139
    Where can I find HDT5 pulleys with 10mm bore, any suggestion?

  12. #140
    Chaz's Avatar
    Lives in Ickenham, West London, United Kingdom. Last Activity: 2 Weeks Ago Has been a member for 9-10 years. Has a total post count of 1,600. Received thanks 110 times, giving thanks to others 69 times.
    Quote Originally Posted by Nickhofen View Post
    Where can I find HDT5 pulleys with 10mm bore, any suggestion?
    http://www.beltingonline.com - Very good to deal with.

Page 14 of 35 FirstFirst ... 4121314151624 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. cnc 4axis hot wire mach3;
    By maikonesk in forum Hotwire Cutting Machines
    Replies: 3
    Last Post: 07-08-2015, 02:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •