1200mmX900mmX170mm 4axis cnc

[driftspin]

Yes Bert what you say it's true, UB1 needs only 24volts which converts it to 5 volt , with some restrictions,has on board 3 relays , from those you can control a sequence , powering up power relays etc.and other features.

My problem is that it is more complicated than the one and only 5$ bob I have ever install, at my previews cnc and also much more expensive, the last one makes me more nervous to experiment! I must be a 100% sure before power it up!

My parts are:
2x AM882H
2X AM882
1x78Volts PSU 7Amps
2x12 volt psu 330watt
HY VFD with 2.2kw water cooled spindle
water pump...etc.
I hope I did n't forget a major component , if i remember something I will edit my post.

Thanks,Nick.

Any home switches?

Do you want to control spindle speed by 0-10v?

Estop?

Air valves?

cooling pumps?

Grtz. Bert

Verstuurd vanaf mijn SM-A320FL met Tapatalk

[Nickhofen]

Any home switches?

Do you want to control spindle speed by 0-10v?

Estop?

Air valves?

cooling pumps?

Grtz. Bert

Verstuurd vanaf mijn SM-A320FL met Tapatalk

Right now I have the Estop ,NPN proximity switches and water pump.
I will add all the rest ,everything I can add and also a potentiometer for spindle speed control.

[Clive S]

I can add and also a potentiometer for spindle speed control.

I posted this some time ago. #1 http://www.mycncuk.com/threads/7388-...se-Spindle-VFD

[Nr1madman]

Nice! What wood is used for the handle? :D

Been watching alot of YouTube vids about knifemaking so maybe I should give it a go aswell ..?

Skickat från min SM-G955F via Tapatalk

[Nickhofen]

Hi Robert.
The handle is made from root of Olive tree,those trees are very common here.
Do you watch the competition "Forged in Fire" also? ;-)

[Nickhofen]

After some reading at old threads I place the last orders at Aliexpress for contactor, relays, slow blow fuses, power supplies etc.
I want to say a big thanks to routercnc and driftspin for the help they offer at the backstage, and all the other people of course that keep answering my silly questions! :)

[routercnc]

Can’t remember what I did but you are welcome. Just passing it on . . .

[Nickhofen]

I am thinking to place the parts that way in the control box,will it be any problem with the positioning of VFD?
If I remember correctly people puts shielede cables to the signal wires ,wires that goes to controllers, motors etc. right?

[Doddy]

And the fail number two is that I make a hike for an e-stop and one for emergency stop...

Surely the second hole for estop is for the big flashing lamp??

[Nickhofen]

Surely the second hole for estop is for the big flashing lamp??

Why didn't I thought of that ! Now I need an extra big lamp to put in there!
Thanks guys you are all so kind!
I am thinking to place the emergency stop at the bottom right ,since there is the right hole for the switch and scrape the e- stop letters from the bottom left hole?
Maybe I can put another switch on the bottom left hole in the future a button that I can not think of now.
For sure I can print new letters or marking on the panel....