Page 24 of 24 FirstFirst ... 14222324
  1. #231
    Quote Originally Posted by JAZZCNC View Post
    With 5mm pitch go with 1:1 ratio. This will give you good balance of speed/resolution.
    Thanks Dean, I will do that!
    Last edited by Nickhofen; 3 Weeks Ago at 02:01 PM.

  2. #232
    I start cutting and drilling parts from 20mm mdf to see if they fit right, after that I am going to use the mdf parts and my router table to shape the 20mm aluminium.
    Click image for larger version. 

Name:	32089549_2090858987862089_388262981974097920_n (1).jpg 
Views:	32 
Size:	138.5 KB 
ID:	24205
    Click image for larger version. 

Name:	31969778_2090859181195403_4031857535022530560_n.jpg 
Views:	26 
Size:	85.2 KB 
ID:	24206
    Click image for larger version. 

Name:	31963954_2090860027861985_1011361280906231808_n.jpg 
Views:	25 
Size:	84.4 KB 
ID:	24207

  3. #233
    Nice! For some parts I wish i made a trialpiece first.. smart! ;)

    Skickat från min SM-G955F via Tapatalk

  4. The Following User Says Thank You to Nr1madman For This Useful Post:


  5. #234
    Quote Originally Posted by Nr1madman View Post
    Nice! For some parts I wish i made a trialpiece first.. smart! ;)

    Skickat från min SM-G955F via Tapatalk
    It is time consuming but stress relief!
    I use the clear plexiglass to make the holes,this method is fast and accurate,no measurements to take and nothing can go wrong this way,you see thru the plexiglass where you must drill and just drill,freehand.
    The you put the Plexi on the mdf or aluminum plate ,put both on the drill press and make your drills nice and square!

Page 24 of 24 FirstFirst ... 14222324

Similar Threads

  1. cnc 4axis hot wire mach3;
    By maikonesk in forum Hotwire Cutting Machines
    Replies: 3
    Last Post: 07-08-2015, 01:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •