. .
  1. #1
    kell's Avatar
    Lives in doncaster, United Kingdom. Last Activity: 3 Weeks Ago Has been a member for 9-10 years. Has a total post count of 53.
    I'm using solid cam, and i have parts to machine which are minute, the screen shot is what i get on solid verify and looks awful .the bit is down to 0.50 ball endmill if i try a smaller bit it looks even worse. the first screen shot is a section of the part and the other is what i see in solid verify.
    Click image for larger version. 

Name:	Screenshot (40).png 
Views:	495 
Size:	359.5 KB 
ID:	21747
    Click image for larger version. 

Name:	Screenshot (39).png 
Views:	442 
Size:	226.0 KB 
ID:	21746
    Last edited by kell; 22-05-2017 at 05:34 AM.

  2. #2
    How small is your stepover? You seem to be stepping over the whole diameter of the cutter by the looks of your graphics. For a ballnosed cutter you only need a stepover of 0.05-0.1mm.


    Sent from my iPad using Tapatalk

  3. #3
    kell's Avatar
    Lives in doncaster, United Kingdom. Last Activity: 3 Weeks Ago Has been a member for 9-10 years. Has a total post count of 53.
    sorry for late reply i was away. I have now changed a setting and the tool works great in it, the problem is i am not sure of the setting i have changed because when i repeat the operation with the same tool it misses a section again.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HSMWorks and HSMXpress: post processor editing
    By Mad Professor in forum CAD & CAM Software
    Replies: 5
    Last Post: 16-12-2016, 10:05 AM
  2. Post Processor for Heidenhain tnc 145???
    By jackpat in forum CAD & CAM Software
    Replies: 15
    Last Post: 04-07-2016, 09:17 PM
  3. Help with Post Processor
    By superpot in forum CAD & CAM Software
    Replies: 0
    Last Post: 20-11-2013, 10:23 AM
  4. Vectric Post Processor
    By p1lts in forum General Discussion
    Replies: 2
    Last Post: 08-10-2011, 07:02 PM
  5. Post processor Sei
    By 2006Nobull in forum Machine Discussion
    Replies: 12
    Last Post: 04-08-2011, 11:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •