1. #1
    Until 31st July 2017, customers in the US, Canada, UK, Germany, Italy, Spain, France, EU, Australia, Japan, Singapore and Korea can purchase a 1-year subscription to Autodesk ArtCAM Standard including Advanced Support, with a 50% discount!

    You can compare the different Autodesk ArtCAM products here.

    US customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for $180.

    Canadian customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for $222.50.

    UK customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for 204.

    German customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for 235,02.

    Italian customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for 240,95.

    Spanish customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for 238,97.

    French customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for 237,00.

    EU customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for 238,97.

    Australian customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for $255.00.

    Japanese customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for 29,700.

    Singaporean customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for $184.58.

    Korean customers should:

    • click here to purchase a 1-year subscription to Autodesk ArtCAM Standard for 237,188원.

  2. The Following User Says Thank You to DogBeagle For This Useful Post:


  3. #2
    $180 = 204 eh?
    Shifty doesn't even begin to describe the maths used there :D
    You think that's too expensive? You're not a Model Engineer are you? :D

  4. #3
    I've no idea what exchange rate mechanism Autodesk, who are an American company, use to set their prices between different countries!

  5. #4
    I merely asked as it's you who appears to be advertising the offer here :D
    You think that's too expensive? You're not a Model Engineer are you? :D

  6. #5
    Quote Originally Posted by magicniner View Post
    I merely asked as it's you who appears to be advertising the offer here :D
    No problem at all. I noticed Ger21 had posted details of an expired offer here, so I posted the latest one.

  7. #6
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 4 Hours Ago Has been a member for 9-10 years. Has a total post count of 1,794. Received thanks 189 times, giving thanks to others 5 times.
    Quote Originally Posted by magicniner View Post
    $180 = 204 eh?
    Shifty doesn't even begin to describe the maths used there :D
    That 204 includes VAT though, so realistically it's 170.
    Still not that great, but not too bad considering the whole digital media sales tax hoops that now exist.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  8. #7
    Quote Originally Posted by m_c View Post
    That 204 includes VAT though, so realistically it's 170.
    Still not that great, but not too bad considering the whole digital media sales tax hoops that now exist.
    If cashback tracks successfully, which I posted about here, the overall cost would be reduced a bit further. I've used Quidco and Topcashback in the past with various retailers, and cashback is typically paid after a few months. Sometimes the cashback amount is calculated on the price excluding VAT, other times on the price including VAT.
    Last edited by DogBeagle; 23-05-2017 at 02:13 PM.

  9. The Following User Says Thank You to DogBeagle For This Useful Post:


Similar Threads

  1. FREE Autodesk Fusion360 Ultimate for hobbyists
    By mitchejc in forum Fusion 360
    Replies: 7
    Last Post: 02-04-2015, 02:54 PM
  2. Autodesk Fusion 360 $300yr FOR LIFE, LAST CHANCE !!!
    By Lee Roberts in forum Fusion 360
    Replies: 0
    Last Post: 09-11-2014, 04:08 PM
  3. Autodesk 123d
    By Musht in forum AutoCAD
    Replies: 2
    Last Post: 28-02-2014, 08:00 AM
  4. URGENT HELP RE Autodesk Inventor
    By craigrobbo in forum AutoCAD
    Replies: 6
    Last Post: 24-03-2013, 10:24 AM
  5. Z axis assembly - unsupported rail for very limited movement
    By dsc in forum Gantry/Router Machines & Building
    Replies: 2
    Last Post: 10-10-2012, 12:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •