Page 1 of 2 12 LastLast
  1. #1
    For Sale CNC Router 1300mmx1300mmx150mm working area

    Self Build with much help form JazzCNC on here, for personal reasons has not been used much (a few hours). Comes with Computer with Mach installed and Custom made work bench. Bed is busboard and 18mm MDF.

    Tested to commission stage but will require some calibration and final setup

    1700mm x 1450mm x 850mm
    1300mmx1300mmx150mm working area
    Kress 1050 FME spindle
    25mm x12mm pitch ball screws and fully supported rails
    150mm travel on the vertical z axis
    Rigid Aluminium Frame from section and plate
    Full pc & monitor with mach 3 pre installed
    Nema 3.1NM motors with stepper drivers and power
    Custom Made workbench included
    Supply not enclosed
    Cabling requires boxing
    Some calibration required

    Please PM me with sensible offers Please
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	CNC1.jpg 
Views:	390 
Size:	450.1 KB 
ID:	21770   Click image for larger version. 

Name:	CNC2.jpg 
Views:	343 
Size:	561.0 KB 
ID:	21771   Click image for larger version. 

Name:	CNC3.jpg 
Views:	331 
Size:	196.2 KB 
ID:	21772   Click image for larger version. 

Name:	CNC4.jpg 
Views:	263 
Size:	191.6 KB 
ID:	21773   Click image for larger version. 

Name:	CNC5.jpg 
Views:	269 
Size:	223.2 KB 
ID:	21774  

  2. #2
    Could i ask a rough estimate on what you would like im not very good with offers.

    Thankyou

  3. #3
    Hi There Yes it is still for sale I've sent you an email

  4. #4
    Have you sold this yet, if not can you send me more detail please including a rough price your looking for and area it is to be collected from.

    thanks

    Paul

  5. #5
    Hi Paul
    I've PM'd you

  6. #6
    Hi! If machine still unsold please send me your price and location. Thank you

  7. #7
    hi , is this still available?

  8. #8
    Hi yes it is still for sale but have had quotes from 2 companies who deal with cnc machines, and parts ect and both have offered quite good prices for it, I am just waiting to hear back from them, also would like to try finish my conversion first before I sell this part.

  9. #9
    Hi There yes it is PM me for details thnx

  10. #10
    thanks for replying, can you pm me with your price and where you are please? cheers

Page 1 of 2 12 LastLast

Similar Threads

  1. NEW MEMBER: Hello from Portsmouth area
    By Crazy L in forum New Member Introductions
    Replies: 11
    Last Post: 22-06-2017, 08:46 AM
  2. BUILD LOG: Aluminum profile and alu plate 1500mm x 600mm x 150mm working area, first cnc.
    By pierantoine in forum DIY Router Build Logs
    Replies: 36
    Last Post: 01-04-2017, 10:33 PM
  3. Advice on Mammoth CNC Router Build - Steel Framed - 2440mm x 1220mm cutting area!
    By Wejjmeister in forum Gantry/Router Machines & Building
    Replies: 87
    Last Post: 02-01-2016, 11:45 PM
  4. Melbourne Andy CNC 1220x810 working area
    By AndyGuid in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 17-04-2014, 10:41 AM
  5. NEW MEMBER: Hi from Beds area
    By deannos in forum New Member Introductions
    Replies: 1
    Last Post: 04-11-2010, 10:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •