epoxy question

[driftspin]

Did you make sure that the surfaces were clean and free of any oil deposits. I have used the West system with no issues and the epoxy bonds well to the steel.

well made sure... degreased with brake cleaner.. wipedown and brake cleaner 2 times before grinding...

maybe use paint thinner or amonia or something else...



the test was done with 20gr resin + 8 gr hardner.... bigger volume will give me better resolution (1gr precision scale )

Verstuurd vanaf mijn SM-A320FL met Tapatalk

[JoeHarris]

well made sure... degreased with brake cleaner.. wipedown and brake cleaner 2 times before grinding...

maybe use paint thinner or amonia or something else...



the test was done with 20gr resin + 8 gr hardner.... bigger volume will give me better resolution (1gr precision scale )

Verstuurd vanaf mijn SM-A320FL met Tapatalk

To be honest I never tried it with such small quants just went straight for the big pour! But it worked fine.
http://www.mycncuk.com/threads/4513-...9752#post79752