Threaded View
-
17-06-2017 #19
We partially agree .. as usual .. and I try hard to never be belligerent.
A good top end machx setup is perfectly equal, in many ways better, to an industrial control like haas or the chinese fanuc copies, but with caveats and specific drawbacks.
The speed you quote, I think, is erroneous.
My max speed, at 0.2 microns step size, is 12 metres / minute.
You are perfectly correct that 95% of users can run (quite/very) well with a(uccnc or..) chinese 200$ hw control box +/-, running a fanuc copy of some kind.
This means no bob, and is (often, slightly) cheaper then the uccnc setup. Immaterial in truth.
A SS can also run 90%+ of stuff very well ... but there is a reason I binned mine many years ago. As did () others.
I have no idea about the instant feedhold/fro/so you get, and the mpgs response, but if they are in fact fast then they are great. Good for You.
I pointed out 5 exact hw features that work extremely well today,
mostly not supported all-together by most competitive setups I know of,
as good as or better than current industrial controllers,
that are extremely important,
for all users in general,
after You seemed to disparage, for some reason, my factual, objective, technical, comments regarding different cnc controllers, in my humble opinion.
As I see it.
A variable 10-1000 ms, or 0.01 - 1 s delay, in feedhold, is critical and very bad (like the very old first USB mach3 plugins, generally).
Etc..
Slow probing is very bad ... as it makes probing either slow or inaccurate - Way It Is.
Etc..
Ger21 .. You did not make any factual statements re:speed, response, delay, jitter, or technical capacities of UCCNC, as far as I can see.
Please try to be polite and respond to technical posts with technical data.
I am sure I make mistakes ... and am perfectly willing to learn and adjust my POV etc.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Is there anybody else seriously using VB to program the G code they need?
By cncgcg in forum Programmers CornerReplies: 12Last Post: 16-11-2015, 10:04 PM -
Can linear scales be used in conjunction with mach 3 software?
By Ady37 in forum General DiscussionReplies: 9Last Post: 13-07-2015, 06:09 PM -
Gerber System 48 with Mach 3 software training required!
By Ahmed in forum Opportunities Available & SoughtReplies: 0Last Post: 07-11-2013, 08:56 PM -
May you please have a look at my program ?
By hoezap in forum Programmers CornerReplies: 2Last Post: 16-02-2013, 11:54 AM -
How do I program my TECO VFD? Help!!
By ArdenHTF in forum General DiscussionReplies: 10Last Post: 08-07-2011, 12:23 PM
Bookmarks