1. #1
    As the title says this is a professionally made router by Pacer

    Early model and the frame etc is made from HDF which is like MDF but far denser. They built them by glueing up all the pieces, then machining them flat before assembling the linear rails.

    It was bought as a project, dismantled as its very heavy and brought home and stored. It is complete with NSK linear rails and ground ball screws. I can throw 3 Nema 24, 4nM motors in and 3 API stepper drives.
    There are no other electronics other than an orphan pacer board underneath. It is floor standing on its own cabinet and would be an ideal project for someone wanting a very robust workhorse.
    Still in a dismantled state for transport but very heavy, will take a two man lift and I can't help as selling this due to health reasons.

    500 firm, no offers, no tyre kickers or Reliant owners.

    Located 3 miles from J24 or J25 of the M1. NG10 post code.

    John Stevenson.
    Contact via Pm or john@stevenson-engineers.co.uk
    John S -

  2. #2
    John - Would you have an assembled photo or diagram please. Some idea of foot print also if possible.

  3. #3
    Not got any assembled photos, didn't bother as it was going to be a project for me. However I have found a picture on Google images of its twin and I'll post them hopefully tomorrow when I can get to a computer as I only have a phone at present
    John S -

  4. The Following User Says Thank You to John S For This Useful Post:

Similar Threads

  1. WANTED: 1300 x 900mm laser required
    By discordian in forum Items Wanted
    Replies: 1
    Last Post: 31-03-2017, 08:28 PM
  2. FOR SALE: RM1610 ballscrews(used + 1605 x 900mm screw (new)
    By rbs in forum Items For Sale
    Replies: 1
    Last Post: 10-05-2012, 07:23 PM
  3. WANTED: Profile rails, 600mm and 900mm
    By Jonathan in forum Items Wanted
    Replies: 2
    Last Post: 16-08-2011, 08:18 AM
  4. FOR SALE: CNC for sale 3000mm x 900mm+ bed size
    By c cunningham in forum Items For Sale
    Replies: 1
    Last Post: 15-06-2011, 03:35 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts