. .

Thread: Boxford TCL125

Page 1 of 2 12 LastLast
  1. #1
    I am looking at selling my boxford cnc lathe . I have had it for over 7 years . I bought it in its original condition and then converted all electronics and stepper motors . I have made hundreds of parts on it with a home made tool platton and tool holders . I also have an 8 station turret that can be bolted back on . The machine has the wiring to add the turret . It has a speed detection which can be used for threading with the right software although I never had the need to use it . It has always been used with Mach3 . The only drawback is that there are no limit swithes .

    I have not used it for 2 years because the computer running it fell over , but it was working fine up to that point .

    It is heavy enough to need 2 people to carry it but small enough to sit on a desktop . I have machined a lot of brass with 1mm DOC and different plastics with deeper DOC. It holds a good tolerance and is very repeatable.

    I will add some pictures as soon as I have figured out how to do so .

  2. The Following User Says Thank You to 30tooo For This Useful Post:


  3. #2
    Hi Im very interested in your lathe Please could you contact me so that I may ask some questions price etc. I am just about to make a commitment on another one when I saw your ad. Please get in touch asap....Cash waiting.
    Rob

  4. #3
    please tell me how i can get in touch about this lathe

  5. #4
    my contact details are : [/email]
    Last edited by Cantbedone; 22-06-2017 at 04:26 PM.

  6. #5
    Quote Originally Posted by Cantbedone View Post
    my contact details are :
    I would remove your email address because of the spammers out there. A PM is a better way
    ..Clive
    The more you know, The better you know, How little you know

  7. The Following User Says Thank You to Clive S For This Useful Post:


  8. #6
    Thanks for that Clive, 1, how do I remove It 2, how do I PM?

  9. #7
    AHHHH done it?
    Just godda figure out PM?

  10. #8
    Quote Originally Posted by Cantbedone View Post
    AHHHH done it?
    Just godda figure out PM?
    Click on you name next to the flag and you will see (private message) you might need to make a few posts before that comes up
    ..Clive
    The more you know, The better you know, How little you know

  11. #9
    Thats it now clive thanks I now can PM and Edit my messages

  12. #10
    Hi, very interested. is this still for sale?

    Regards,
    Elliott Hill

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CONVERSION: Boxford TCL 160
    By Saracen in forum Conversion Build Logs
    Replies: 38
    Last Post: 01-08-2021, 05:50 PM
  2. Replies: 2
    Last Post: 21-04-2016, 09:18 AM
  3. Boxford 165 HMC
    By uli12us in forum Boxford Vertical Mills
    Replies: 48
    Last Post: 24-01-2016, 08:21 PM
  4. boxford vmc 300
    By bigred5765 in forum Boxford Vertical Mills
    Replies: 0
    Last Post: 22-04-2014, 04:22 PM
  5. cost of converting vmc260 and tcl125 to mach 3
    By franky in forum Milling Machines, Builds & Conversions
    Replies: 2
    Last Post: 12-01-2014, 10:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •