Page 2 of 2 FirstFirst 12
  1. #11
    Quote Originally Posted by Neale View Post
    Essentially, I think you have a geometry issue here. On the gantry, the arm is positioned and pivoted so that the pinion moves roughly at 90deg to the rack. However, the X pinion arm is pivoted so that the pinion moves almost parallel to the rack. I know that it's not quite parallel, but it's close enough that even with a very strong spring, there is relatively little force acting to keep the pinion engaged. Would it be possible to use a fixed vertical plate going down from the gantry with a pivoted horizontal arm carrying the pinion? I can see that that might give belt tension issues, but that might be an easier problem to fix!
    The solution for belt tensioning would be to have two belts, one on the vertical arm and one on the horizontal, with two pulleys on a shaft at the pivot point.
    Albert Einstein may have been a genius, but his brother Frank, was a monster

    Having just moved to Windows 10 (which is crap) My stress levels are through the roof !!!

  2. #12
    Thanks guys, am going to fix the shoulder drops, then pivot the plate on the same axis as the rack. this will require more belts. Matt

  3. #13
    I was thinking split the plate, fix the top, pivot the bottom, use a bigger belt (probably) and design in a spring loaded cam follower feature that would auto adjust the timing belt tension as the pinion mechanism/plate adjusts in real time.

    Click image for larger version. 

Name:	flatc4.gif 
Views:	106 
Size:	55.6 KB 
ID:	23403
    Last edited by Lee Roberts; 13-12-2017 at 06:16 PM. Reason: Added pic
    .Me

  4. #14
    Whats the software of choice for plasma? and can anybody steer me in the right direction ? :D

Page 2 of 2 FirstFirst 12

Similar Threads

  1. FOR SALE: CNC Plasma Cutter For Sale
    By billm in forum Items For Sale
    Replies: 6
    Last Post: 17-07-2012, 06:50 AM
  2. Which Plasma Cutter to buy?
    By AndyG in forum General Discussion
    Replies: 7
    Last Post: 02-12-2011, 08:34 AM
  3. cnc plasma cutter problems
    By oadamo in forum General Discussion
    Replies: 8
    Last Post: 21-06-2011, 08:28 PM
  4. First Plasma Cutter
    By antsals in forum Plasma Table Machines
    Replies: 3
    Last Post: 16-05-2011, 06:58 AM
  5. Plasma Cutter Drive
    By antsals in forum Plasma Table Machines
    Replies: 0
    Last Post: 23-08-2010, 04:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •