Threaded View
-
One problem using the PP is that until the pc is powered up the pins can be in any rambled state and they can also chatter as the pc is powering up causing all sorts of unexpected happenings. That is the beauty of a motion controller this behaviour does not happen with Lcnc and a Mesa card.
edit Having said that you might be able to use the charge pump in Mach3 so that the bobs are not enabled until the charge pump signal is seen.Last edited by Clive S; 08-07-2017 at 04:22 PM.
..Clive
The more you know, The better you know, How little you know
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Toolbox Refurb - New Handle Fittings
By Wal in forum Metalwork Project ShowcaseReplies: 4Last Post: 22-09-2016, 10:26 PM -
CONVERSION: Sx2 plus cnc conversion
By Lewywri89 in forum Conversion Build LogsReplies: 11Last Post: 30-11-2014, 11:36 PM -
RFQ: CNC Myford Conversion
By Jconway651 in forum Projects, Jobs & RequestsReplies: 0Last Post: 16-10-2014, 09:52 AM -
CONVERSION: X2 conversion on a budget!
By craigrobbo in forum Conversion Build LogsReplies: 1Last Post: 30-10-2012, 05:00 PM -
Sieg sx2 conversion kit
By Goldigger in forum Milling Machines, Builds & ConversionsReplies: 3Last Post: 24-04-2011, 07:42 PM
Bookmarks