Thread: johan brink

  1. #1
    hi every one
    i am a new member
    i am building my own 3 axes cnc router cutter
    i design it bussy building it, but one problem
    the elctronics gets me under
    the diagrams and the hardware is not the same
    stepper controler pm542, stepper motor m60sth88-3008df, interface card pcpps, power supply ps407 and handy pulser ismm 1468

    email :waterelec@telkomsa.net

  2. Quote Originally Posted by johan View Post
    hi every one
    i am a new member
    i am building my own 3 axes cnc router cutter
    i design it bussy building it, but one problem
    the elctronics gets me under
    the diagrams and the hardware is not the same
    stepper controler pm542, stepper motor m60sth88-3008df, interface card pcpps, power supply ps407 and handy pulser ismm 1468

    email :waterelec@telkomsa.net
    Welcome Johan. Can you be a little clearer what the problem is with the electronics? The wiring for most 3 axis drives is usually pretty much the same whatever supplier/product. What usually gets people is the wiring between driver and motor. If you explain your specific problem we should be able to help...

  3. #3
    Johan,
    I got your email, and I will email you a wiring schematic tomorrow when i get to the office.

    Gary

    Quote Originally Posted by johan View Post
    hi every one
    i am a new member
    i am building my own 3 axes cnc router cutter
    i design it bussy building it, but one problem
    the elctronics gets me under
    the diagrams and the hardware is not the same
    stepper controler pm542, stepper motor m60sth88-3008df, interface card pcpps, power supply ps407 and handy pulser ismm 1468

    email :waterelec@telkomsa.net

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •