. .

Thread: New start

Page 12 of 41 FirstFirst ... 2101112131422 ... LastLast
  1. #111
    That attitude is good, I like positive thinking something I want to keep under all situations...I hope to keep it at my cnc building too,lol!!!
    Last edited by Nickhofen; 11-11-2017 at 04:48 PM.

  2. #112
    Bought a supercheap dti with magnetic base and started checking my ballscrews as Im getting some binding and wobble.
    After shimming some bk/bf bearings its much better. Still get some wobble as the screws are not quite straight. Or it might be the end machining...

    Im measuring about 0.2-0.4mm of wobble in the different screws. Anything to care about?

    Skickat från min SM-G955F via Tapatalk

  3. #113
    Progress!!

    Not much done but it feels great to have mounted the spindle :)

    Have misplaced a bracket I made for the cablechain.. Will have to make a new one ;)



    Skickat från min SM-G955F via Tapatalk

  4. The Following User Says Thank You to Nr1madman For This Useful Post:


  5. #114
    Wow it looks good!!!!

  6. The Following 2 Users Say Thank You to Nickhofen For This Useful Post:


  7. #115
    Quote Originally Posted by Nickhofen View Post
    Wow it looks good!!!!
    Thank you :D

    Skickat från min SM-G955F via Tapatalk

  8. The Following User Says Thank You to Nr1madman For This Useful Post:


  9. #116
    Do you have any plans for this machine? Looks like a great machine so far :)

  10. #117
    Haha thanks ;)
    No plans yet.. have to make it work first :D

    Skickat från min SM-G955F via Tapatalk

  11. #118
    Some questions for you all :)

    Have had no time in the shed because of sick kids so no progress, only planning.
    Thinking/planning the electrical stuff and think I have the normal stuff sorted out like psu and motors..

    Question 1.
    Enable signal to drivers.
    Should you use it and why? As I understand it it's normal to skip it? Do understand that you can use it to clear driver errors if they should occur..?
    If I should choose to connect them it's just 5v to ena+ and parallellconnect ena- to the enable port on the bob?

    Question 2.
    I have this Chinese bob


    And I found a nifty schematic here on the forum. Think it was Jazz who posted it. It says how to connect the bob to the vfd to control it via software. On/off and rpm via 1-10v. Have the HY vfd so have to change parameters pd001 and pd002. It sounds good! Then I found this schematic from routercnc

    Here he has buttons and relay to start/stopp and a pot for speed. This appeals to me as I love panel buttons but I want to have the software option as well :)
    Is it possible to connect both kind of systems?

    Question 3.
    Was planning to follow a schematic from jazz for the general safety layout. Bet it's familiar to you all

    Then I found this from eurican (spelling might be off here)

    Here he has a switch for the limit override and a buzzer so that he doesn't forget to reset it to limits.. is this safer than the momentary switch in jazzes schematic? Or just that you don't have to hold it in while jogging off the switch?

    Thank you for your thoughts :D

    Skickat från min SM-G955F via Tapatalk

  12. #119
    Will answer myself :D

    Question 3, reread euricains thread and found the same discussion. (Maybe that's why I had the question from the start hehe)
    So if you can reach it's better with button instead of switch so you don't forget!

    Skickat från min SM-G955F via Tapatalk

  13. #120
    Another questions for you all!

    Will have my pc in my controlbox.
    Is it safe/okey/good practice to use 5v from pc psu or should I use the nice chinese psu that I have bought?

    Skickat från min SM-G955F via Tapatalk

Page 12 of 41 FirstFirst ... 2101112131422 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: We all need to start somewhere!
    By Realtime in forum New Member Introductions
    Replies: 0
    Last Post: 16-05-2017, 08:43 PM
  2. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 10:50 AM
  3. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  4. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  5. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •