Thread: New start

Page 41 of 41 FirstFirst ... 31394041
  1. #401
    Nice!!!
    Let us see it when it's done!

  2. #402
    Very good to hear. USB is not very reliable so it is likely that you have now solved the problem.

  3. #403
    Update!

    The machine ran for 7hours today with no fake stops. Feels amazing :D

    Now I have to slowly reintroduce all connections with switches and vfd connections.
    I'm hoping it will continue working ;)

    Skickat från min SM-G955F via Tapatalk

  4. The Following User Says Thank You to Nr1madman For This Useful Post:


  5. #404
    Quote Originally Posted by Nickhofen View Post
    Nice!!!
    Let us see it when it's done!
    Will have to delay this, the carving is a present and the receiver might be reading this :D

    Skickat från min SM-G955F via Tapatalk

  6. The Following 2 Users Say Thank You to Nr1madman For This Useful Post:


  7. #405
    Alright!
    Seems like I have sorted the usb trouble I was having.
    Turns out it's the usb connector on the uc300board thats slightly misbehaving.
    If I keep the usb cable slightly stretched to the right to put small pressure on the usb socket everything runs fine.
    I know this is a hillbillyfix but right now it's working. Am planning Ethernet in the future :D

    On that note. Have bought a rs485 ethernetadapter following the tip from A Camera.
    Which plugin should I use for uccnc?
    Found both the HY plugin (have HY vfd) and modbusplugin?
    Other than that it's overdue on some buildpics in the thread. Have none right now but have made some progress so I guess I should document them :D

    Skickat från min SM-G955F via Tapatalk

  8. The Following User Says Thank You to Nr1madman For This Useful Post:


Page 41 of 41 FirstFirst ... 31394041

Similar Threads

  1. NEW MEMBER: We all need to start somewhere!
    By Realtime in forum New Member Introductions
    Replies: 0
    Last Post: 16-05-2017, 07:43 PM
  2. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 09:50 AM
  3. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 01:35 PM
  4. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 10:29 AM
  5. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 11:21 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •