. .

Thread: New start

Page 32 of 41 FirstFirst ... 223031323334 ... LastLast
  1. #311
    Post the G-code

  2. #312
    Quote Originally Posted by Nr1madman View Post
    Been playing some more :D

    Look at this video, what might be causing this weird motion?
    To fast motion for set kernel speed or just funky g code?
    Have cut circles with constant speed so this was a first :)
    https://m.youtube.com/watch?v=hlvP9uEJP8g

    Skickat från min SM-G955F via Tapatalk
    The fact that it looks the same each rotation would suggest to me its the G-code itself, it could be made up of arcs not radii and the machine could be in exact-stop mode maybe?

  3. #313
    Quote Originally Posted by JAZZCNC View Post
    Post the G-code
    Alright, go easy on me as I have no clue what Im doing in cam :D
    Attached Files Attached Files

  4. #314
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom. Last Activity: 13 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,333. Received thanks 618 times, giving thanks to others 78 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Removed
    Last edited by Clive S; 02-04-2018 at 05:42 PM.
    ..Clive
    The more you know, The better you know, How little you know

  5. #315
    Quote Originally Posted by Clive S View Post
    You have not posted your gcode you appear to have posted the ini file
    I don't think so?
    When I open it it's :
    (No. 1: Part 1)
    G00 X16.9301 Y32.4734
    G00 Z0.5000
    G01 Z0.0000 F600 S24000
    G01 X17.0971 Y32.2580 Z-0.1363
    G01 X17.5547 Y31.6925 Z-0.5000
    G01 X17.0971 Y32.2580 Z-0.8637
    G01 X16.9301 Y32.4734 Z-1.0000
    G01 X17.0971 Y32.2580 F1200
    G01 X18.3224 Y30.7439
    G01 X18.3753 Y30.6802
    G03 X165.3861 Y35.5432 I71.6236 J59.3169
    G03 X168.5055 Y40.1417 I-73.9716 J53.5375
    G01 X168.5497 Y40.2117
    G01 X169.5325 Y41.7967
    G01 X170.2938 Y43.0831
    G01 X170.5245 Y43.4729
    G01 X171.4812 Y45.1695
    G01 X171.5210 Y45.2421

    And so on..


    Skickat från min SM-G955F via Tapatalk

  6. #316
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom. Last Activity: 13 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,333. Received thanks 618 times, giving thanks to others 78 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Sorry you are correct for some reason I down loaded it to a Chromebook then had to rename it and it showed up as a warco.ini file upon checking again it must have been in cache. Strange!!

    Anyway in looks like it is the Cam giving you the problems with straight line segments
    Last edited by Clive S; 02-04-2018 at 05:49 PM.
    ..Clive
    The more you know, The better you know, How little you know

  7. #317
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 3 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,908. Received thanks 360 times, giving thanks to others 8 times.
    Unless those straight line moves cause an abrupt direction change that creates a corner angle larger than the set corner break angle/corner rounding settings which would force an exact stop, then they shouldn't cause any problems.

    Has exact stop mode (G61) been enabled in your controller?
    I don't see it in your G-code file, but you could try adding a G64 to the beginning to see if things improve.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  8. #318
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 3 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,908. Received thanks 360 times, giving thanks to others 8 times.
    And having just run the figures, all is revealed.

    Click image for larger version. 

Name:	AngleChange.png 
Views:	186 
Size:	38.2 KB 
ID:	24019

    The short moves are creating two 180deg turns, which will be triggering exact stops.
    And as they're part of a depth change, I'm guessing you need to look at your lead in move settings.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  9. #319
    Thanks for the help guys!

    I'm greatly relieved that my weak camskills are the culprit :)
    Guess do it again, do it right is in order!

    Skickat från min SM-G955F via Tapatalk

  10. #320
    Strange code that what did you create it in.?

Page 32 of 41 FirstFirst ... 223031323334 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: We all need to start somewhere!
    By Realtime in forum New Member Introductions
    Replies: 0
    Last Post: 16-05-2017, 08:43 PM
  2. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 10:50 AM
  3. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  4. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  5. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •