Thread: New start

  1. #1
    Oi fellows!

    Its time for me to finally start my own buildlog.
    Will update as soon as something happens


    Best regards
    Mr madman

  2. #2
    So.. restarted the frame!
    My old welder died on me and from then to now all the steel got used for various purposes :)



    This is where I'm at now with the new fra me :)
    Last edited by Nr1madman; 2 Days Ago at 07:54 PM.

  3. #3
    Wow, in the space of 5 minutes,

    "Its time for me to finally start my own buildlog.
    Will update as soon as something happens "

    (5 minutes later)

    "My old welder died on me and from then to now all the steel got used for various purposes :)"
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  4. #4
    Hehe Im mostly surfing the forums via my phone and for some reason I can't create threads on this forum from the phone. Only reply.. Had to borrow my sons computer to create the first post :)

  5. #5
    Continued with the frame today


    Encountered the first mayor problem.
    I've had the Z axis plates milled from steel. Because of some sloppy cadwork (had my calculations wrong) the Z axis rails had theire holes in the wrong place :(
    Have drilled the hole's larger to get it together so will have to use nuts and washers to fasten the rails.

    Have a feeling I will have to order a new plate :)

  6. The Following User Says Thank You to Nr1madman For This Useful Post:


Similar Threads

  1. NEW MEMBER: We all need to start somewhere!
    By Realtime in forum New Member Introductions
    Replies: 0
    Last Post: 16-05-2017, 07:43 PM
  2. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 09:50 AM
  3. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 01:35 PM
  4. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 10:29 AM
  5. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 11:21 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •