Thread: Fanuc OT - Fuses blowing
Threaded View
-
19-07-2017 #1
Hello,
We have recently moved our old Colchester CNC 1000 and after reconnection it is blowing two fuses. The fuses are S6 and T6 (F1 and F2) 240V-3.15A which are shown on a schematic going to the N.C Control Transformer. The machines red and green start stop buttons eluminate and the Emergency stop seems to work but the screen does not come on.
Any help would be appreciated.
Regards Simon
P.S. This was also posted on CNCzone but hoping Colchester CNC's will be more popular in the UK
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
HEIDENHAIN VRZ 731B - Blowing Fuses
By goweruser in forum General ElectronicsReplies: 2Last Post: 06-02-2017, 10:52 PM -
Wabeco controller fuse blowing
By Stewart in forum Motor Drivers & ControllersReplies: 3Last Post: 01-03-2015, 10:37 PM -
Fanuc w3 paramaters
By Ismirko in forum Machine DiscussionReplies: 3Last Post: 03-02-2015, 08:29 PM -
So close.....am882 driver blowing fuse
By Danielroyal25 in forum Motor Drivers & ControllersReplies: 12Last Post: 29-03-2014, 09:32 PM -
3 axis driver...Fuses keep blowing
By dudz in forum Motor Drivers & ControllersReplies: 5Last Post: 28-01-2013, 08:05 PM
Bookmarks