CNCDrive AXBB super deal?

[lp_felix]

I've started looking at Stand Alone Controllers, it's the future! :D

Do you have tested any standalone controller? I use hass machines and uccnc for the routers but I want dedicated controllers for routers.
Uccnc work really well, but I want a nice panel controller...
I don't want build one from scratch and config everything, is a lot time consuming..

Enviado do meu Redmi Note 4 através do Tapatalk

[driftspin]

Do you have tested any standalone controller? I use hass machines and uccnc for the routers but I want dedicated controllers for routers.
Uccnc work really well, but I want a nice panel controller...
I don't want build one from scratch and config everything, is a lot time consuming..

Enviado do meu Redmi Note 4 através do Tapatalk

Hi lp_felix,

Do you think something like a 10" tablet type screen combined with UCCNC would meet your needs? I saw somebody using a dualcore surface pro with UCCNC.(usb uc300 i think)


I do my design scketching in the house and have the pc in my garage running F360 too, sharing the designs by f360 cloud.
Normally i run the nc export files in the garage.
I installed UCCNC on there to control the router.

When small issues come up i can do touchup in the garage.

I am a hobby cnc user so i do not run series of the same parts.

Having a multifunctional pc near the router is for now a good solution for me.

Somehow i dont see how carrying the nc files to a standalon controlbox per usb- stick as future proof... They should do a wifi solution to read the files from a network share or something.

I have been looking for usb drive / wifi / nas combined devices to overcome this.
It could have made me decide to go for stand alone, but never found a good one.



Grtz. Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk

[AndyGuid]

Do you have tested any standalone controller? I use hass machines and uccnc for the routers but I want dedicated controllers for routers.
Uccnc work really well, but I want a nice panel controller...
I don't want build one from scratch and config everything, is a lot time consuming..

Boyan has tested an offline controller in the following thread that you may find of interest:
http://www.mycncuk.com/threads/10187...256#post102256