1. #1
    CNC Room in Thailand will soon be releasing a new breakout/ motherboard for the UC300ETH, called the UB1.

    Specs will be similar to the excellent MB2 breakout board for the ESS.
    24V I/O
    2 Analog Inputs
    2 Analog Outputs
    0-10V Speed Control
    3 relays
    8 input safety circuit
    5V isolated inputs for TTL device as well. The users can hook up low voltage MPG.

    The UB1 uses 3 ports of the UC300ETH, and provides headers for ports 4 and 5.

    Here's a test video of the first prototype.
    https://www.youtube.com/watch?v=xZn_jq5LR8A

    CNC Room hopes to be ready to start shipping in about 1 month.
    Gerry
    ______________________________________________
    UCCNC 2017 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

  2. The Following 2 Users Say Thank You to Ger21 For This Useful Post:


  3. #2
    Greeny's Avatar
    Lives in North Yorkshire, United Kingdom. Last Activity: 3 Hours Ago Has been a member for 8-9 years. Has a total post count of 102. Received thanks 12 times, giving thanks to others 7 times.
    Thanks for the heads up.
    It's a while since i had a look at their website. It often seems to be down or unresponsive

    I was going to get an mb2 for the uc300eth, but I'll be ordering one of these as soon as they're available.
    Last edited by Greeny; 23-07-2017 at 10:07 AM.

  4. #3
    It's a while since i had a look at their website. It often seems to be down or unresponsive
    I pop in there fairly often, and have never had an issue with their site.

    I'll probably be selling my MB2 as soon as I get the UB1.
    The MB2 is excellent, and the UB1 should be even better for use with UCCNC.
    Gerry
    ______________________________________________
    UCCNC 2017 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

  5. #4
    Greeny's Avatar
    Lives in North Yorkshire, United Kingdom. Last Activity: 3 Hours Ago Has been a member for 8-9 years. Has a total post count of 102. Received thanks 12 times, giving thanks to others 7 times.
    That's weird, been unable to access site all day today.
    Click image for larger version. 

Name:	Screenshot_20170723-180722.png 
Views:	25 
Size:	55.1 KB 
ID:	22249

  6. #5
    Loads fine here...
    Gerry
    ______________________________________________
    UCCNC 2017 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

  7. #6
    Greeny's Avatar
    Lives in North Yorkshire, United Kingdom. Last Activity: 3 Hours Ago Has been a member for 8-9 years. Has a total post count of 102. Received thanks 12 times, giving thanks to others 7 times.
    Ok thanks. Will look into it.

  8. #7
    Looks like a nice board Gerry, thanks for the heads up about it, I've sub'ed also.

    Not sure what BOB i'm going to use on the current machine i'm building but this one looks very promising.
    .Me

  9. #8
    Hopefully I'll have one to play with in 5-6 weeks.
    He's estimating 3 weeks before he can start selling them. I believe that they'll also require a UCCNC update to support them.
    Gerry
    ______________________________________________
    UCCNC 2017 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

  10. #9
    The UB-1 is now available for purchase.
    http://www.cncroom.com/interface-cards/ub1

    They won't be shipping for about a week, though.
    Gerry
    ______________________________________________
    UCCNC 2017 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

Similar Threads

  1. which breakout board?
    By johngoodrich in forum General Electronics
    Replies: 4
    Last Post: 12-03-2017, 12:54 AM
  2. anyone using an e-cut 1 mhz usb breakout board
    By nobby in forum Control Hardware & Systems
    Replies: 9
    Last Post: 25-03-2016, 06:20 PM
  3. routout breakout board
    By hazzard in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 20-09-2015, 08:21 PM
  4. Breakout Board
    By Tomnewry in forum General Electronics
    Replies: 2
    Last Post: 12-12-2013, 06:24 PM
  5. Breakout Board
    By croy in forum Electronic Project Building
    Replies: 10
    Last Post: 18-08-2011, 06:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •