Page 1 of 2 12 LastLast
  1. #1
    Just stumbled in some new interesting boards, Russian maybe. here is the most interesting one price wise http://www.pv-automation.com/products/mycnc-et6 and there are some other offline versions with closed loop and single board computer. They have even quite nice looking software https://www.youtube.com/watch?v=qsif-p0iTF4

    It will be good it seems to put them on the watch list.
    project 1 , 2, Dust Shoe ...

  2. The Following 2 Users Say Thank You to Boyan Silyavski For This Useful Post:


  3. #2
    I'll wait to see if they are candidates for working machines or for gathering dust on John's shelf ;-)
    You think that's too expensive? You're not a Model Engineer are you? :D

  4. Quote Originally Posted by magicniner View Post
    I'll wait to see if they are candidates for working machines or for gathering dust on John's shelf ;-)
    no need to wait, please look at some of them










  5. The Following User Says Thank You to my-cnc For This Useful Post:


  6. #4
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 6 Hours Ago Has been a member for 9-10 years. Has a total post count of 1,791. Received thanks 189 times, giving thanks to others 5 times.
    There does seem to be a few interesting options, but the lack of proper contact details puts me off.
    A bit googling brings up the same contact details (and products) on bevelcutting.com with mention of being used in Russia, but if they are based in Russia, why the need to have a US contact number?
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  7. #5
    Quote Originally Posted by m_c View Post
    but if they are based in Russia, why the need to have a US contact number?
    To lose all the suckers once you've drained the market of Marks?
    You think that's too expensive? You're not a Model Engineer are you? :D

  8. Quote Originally Posted by m_c View Post
    There does seem to be a few interesting options, but the lack of proper contact details puts me off.
    A bit googling brings up the same contact details (and products) on bevelcutting.com with mention of being used in Russia, but if they are based in Russia, why the need to have a US contact number?
    We are based in Canada, Ottawa ON, company started Jan 2013, we have Canada contact number (not the US, however +1 area code is the same).

    Bevelcutting.com is our old website, i didn't revise it a couple of years, but think there is no information that we are based in Russia,
    But yes, we are russian (hope that's not a problem)


    If other question will be glad to answer.
    Regards, Sergey

  9. #7
    Quote Originally Posted by my-cnc View Post
    But yes, we are russian (hope that's not a problem)
    As long as the board doesn't run on Vodka it'll be ok ;)
    Last edited by Desertboy; 09-08-2017 at 09:00 AM.

  10. Quote Originally Posted by Desertboy View Post
    As long as the board doesn't run on Vodka it'll be ok ;)
    just look - no Vodka in the package
    Click image for larger version. 

Name:	15PC-ET7R2C-WP1-005.jpg 
Views:	54 
Size:	272.7 KB 
ID:	22496

  11. #9
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 6 Hours Ago Has been a member for 9-10 years. Has a total post count of 1,791. Received thanks 189 times, giving thanks to others 5 times.
    Quote Originally Posted by Desertboy View Post
    As long as the board doesn't run on Vodka it'll be ok ;)
    Nothing like a bit casual racism and stereotyping to lower the tone.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  12. #10
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 6 Hours Ago Has been a member for 9-10 years. Has a total post count of 1,791. Received thanks 189 times, giving thanks to others 5 times.
    Quote Originally Posted by my-cnc View Post
    We are based in Canada, Ottawa ON, company started Jan 2013, we have Canada contact number (not the US, however +1 area code is the same).

    Bevelcutting.com is our old website, i didn't revise it a couple of years, but think there is no information that we are based in Russia,
    But yes, we are russian (hope that's not a problem)


    If other question will be glad to answer.
    Regards, Sergey
    I'm always wary of sites with few contact details, especially ones which very few people have heard of before. The only mention of location was the reference to being used in Russia on the bevel cutting website.

    I'll be honest and say for the cost of your boards, I can get Dynomotion boards with similar capabilities, and more flexibility for less money. You could even get CS-Labs controllers for less money.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

Page 1 of 2 12 LastLast

Similar Threads

  1. Interesting Kickstarter project.
    By nirmal in forum General Discussion
    Replies: 12
    Last Post: 24-04-2016, 05:27 PM
  2. Interesting story
    By TonyD in forum General Discussion
    Replies: 1
    Last Post: 12-06-2014, 09:46 PM
  3. Vac - clamp looks interesting and cheap what do you think?
    By Fivetide in forum Machine Discussion
    Replies: 3
    Last Post: 10-10-2012, 09:06 AM
  4. Interesting DIY findings from Canada
    By Iwant1 in forum General Discussion
    Replies: 5
    Last Post: 10-09-2012, 09:59 PM
  5. Interesting CNC image BLOG ..
    By emilvv in forum General Discussion
    Replies: 0
    Last Post: 20-07-2009, 08:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •