Thread: How do I stop torn fibres
Threaded View
-
08-08-2017 #1
Guys,
Just getting to grips with my machine and it is finally obeying my instructions.
Please can someone advise me of the possible cause of torn fibres when engraving text. By torn fibres I mean that all round the text the wood is frayed and making it almost impossible to see what the text is. I was using a 90 degree pointed router bit from my normal router set. Router speed was around 16 - 20000.
Not sure if the bit, speed or both causing this problem, appreciate your thoughts
Tony
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Syil X4 Plus - E-stop issue
By Keith-h in forum Milling Machines, Builds & ConversionsReplies: 8Last Post: 03-12-2016, 05:53 PM -
Exact stop / CV problems
By fvfdrums in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 31-08-2015, 01:27 PM -
Spindle Stop?
By manofgresley in forum Spindles & Drive MotorsReplies: 21Last Post: 08-01-2013, 06:37 PM -
E-STOP Circuit - will this cause any problems?
By birchy in forum General ElectronicsReplies: 34Last Post: 18-12-2012, 04:35 AM -
wiring e-stop button
By deannos in forum General ElectronicsReplies: 10Last Post: 14-01-2012, 11:03 AM
Bookmarks