1. #1

    from quite some time i wanted to share my findings and save fellow DIYers some cash , speaking of Spray Paint Guns.

    I have had various Devilbiss, Sagola, 3M and some chinese. from 500 to 10e .

    So i will tell you straight:

    You need only 2 cheap guns to cover your basic needs in a small workshop or if you are building CNC and here they are:

    1. F75 spray gun 1.5mm nozzle
    . Ridiculous 10 euro gun . Ebay number 142241555112

    This is my new gun from before a month as i hacked up my 400$$ 3M gun and did not want to spend 60euro on a nozzle. This is the best bang for a buck ever

    This spray gun sprays epoxy , polyurethane, water based acrylic, wood lacquer, wood tint. Thick or thin. Its up for a job like spraying a whole machine or even a car or a van. Though its not a big gun with a large deposit. I dont know what the chinese did and who copied, but this thing is a beast.

    Click image for larger version. 

Name:	F75.JPG 
Views:	71 
Size:	60.4 KB 
ID:	22601 Click image for larger version. 

Name:	F75 2.JPG 
Views:	57 
Size:	60.1 KB 
ID:	22602 Click image for larger version. 

Name:	F75 3.JPG 
Views:	55 
Size:	84.7 KB 
ID:	22603 Click image for larger version. 

Name:	F75 4.JPG 
Views:	55 
Size:	72.7 KB 
ID:	22604

    2. 0.5mm K3 spray gun
    , again 10 euros. Ebay number 311236578956

    This is the retouch gun. i have used it a couple of years. this is the paint gun for small objects, details, letters, signage, etc. Where you do not want to spend too much paint

    Click image for larger version. 

Name:	K3 spray gun.JPG 
Views:	79 
Size:	65.8 KB 
ID:	22605

    As you may note you can use these guns from ANY position spraying up or down vertically. These babies put to shame any other chinese copy for the money and quality, not to speak of that many producers should be ashamed that 10euro gun sprays better than their brand ones.

    As i am a very practical person, my advice is to buy 2 of each if you are in some fabrication.

    And if you are in a serious fabrication or automotive business the choice will be the 3M 16580 Accuspray Spray Gun System with Standard PPS . I have the previous ACCUSPRAY gun and it was the best gun ever. but i refuse to pay 40$ for a nozzle. Sp this new Accuspray gun has plastic nozzles that you use a couple of times and when they clog, just throw them. isnt that great. Nozzles are cheap.

    Click image for larger version. 

Name:	accuspray 3m_.jpg 
Views:	71 
Size:	373.3 KB 
ID:	22606

    So as a conclusion if you are to have only One Do All Spray gun, then the F75 1.5mm nozzle is the gun for you
    . And drink a beer with the money saved.

    Hope thats helpfull
    Last edited by Boyan Silyavski; 18-08-2017 at 09:06 PM.
    project 1 , 2, Dust Shoe ...

  2. The Following 4 Users Say Thank You to Boyan Silyavski For This Useful Post:

  3. #2
    Thanks Boyan for the tips. I am new to spray painting and I was thinking to start with some cheap spray guns. I already ordered both of them :)

    I have to prepare a lot of mdf with two part polyurethane sealer and primer (not paint). Do you think the F75 spray gun will do the job?

  4. #3
    Very good info, I wish I have found an article like that years ago and before many paint guns and airbrushes ,lol!

  5. #4
    Quote Originally Posted by Boyan Silyavski View Post
    And drink a beer with the money saved.
    Best advice I've seen on here so far ;)

    nice post.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

  6. #5
    Quote Originally Posted by Desertboy View Post
    Best advice I've seen on here so far ;)

    nice post.

  7. #6
    @ Boyan Silyavski,

    I totaly disagree with you. These two sprayguns are totaly watse of time and waste of money. To explain in details:

    After reading your enthusiastic review, I was stupid enough to forget my "if you pay peanuts, you buy monkeys" and decided to buy both of these Chinese-made spray guns from ebay. Like to hear my pesrsonal review? NONE of them works! Yes, they are good to spray air only or maybe fill cup with water and play a little, but these spray guns are actually useless! Reason? It is IMPOSSIBLE to disassemble them in order to clean them after paint spray.

    I DARE you to show us pictures with these cheap Chinese-made "F75" and "K3" spray guns fully disassembled, with needles and nozzles free and ready for clean. To make my point more interesting, I dare to ANYONE who already purchased these cheap HVLP copies, to post pictures presenting the areas shown into following pictures disassembled. Long strory short. Wanna waste money? Buy one of these. I was stupid enough to buy both, because I thought these were a "bargain" as I was fooled by the review. These cheap Chinese-made spray guns are crap.


    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Cheap Chinese HVLP spray guns.jpg 
Views:	1 
Size:	90.9 KB 
ID:	23780  

Similar Threads

  1. BUILD LOG: Small workshop CNC router, steel base, planning on ATC
    By spresv in forum DIY Router Build Logs
    Replies: 24
    Last Post: 07-02-2017, 04:28 PM
  2. Cheap small steppers and drivers
    By m_c in forum Stepper & Servo Motors
    Replies: 9
    Last Post: 31-05-2016, 08:59 PM
  3. is it possible to do a diy help spray machine?
    By reefy86 in forum Machine Discussion
    Replies: 2
    Last Post: 18-01-2016, 11:38 AM
  4. Powder coat & paint
    By craigrobbo in forum Metal Finishing Techniques
    Replies: 6
    Last Post: 06-08-2012, 09:06 PM
  5. NEW MEMBER: Manouchehr from small workshop
    By Manouchehr in forum New Member Introductions
    Replies: 1
    Last Post: 22-08-2010, 10:20 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts