Best cheap Spray Paint Guns for DIY CNC builder or small workshop

[Desertboy]

The title of this thread is; "Best cheap Spray Paint Guns for DIY CNC builder or small workshop"
With key words being, "Best cheap"
Boyan is therefore not trying to say these are as good as 'expensive' spray guns but rather, these are the best he's found that are 'cheap' spray guns.
So if the reader is looking for a cheap spray gun, one of these is a good choice but if the reader wants a better spray gun then look elsewhere.

As cropwell said, the price of solvent is an issue now, gone are the days when you get a gallon of parafin at the local shop.
That's why I buy a pack of dirt cheap paint brushes for non critical work because it's cheaper to bin them than clean them after use.

I bought 25l's of Thinners (We do a lot of vinyl removals on vehicles it's a bastard to clean the glue off) was cheap try car parts suppliers, but normally I chuck the paint brushes anyway as I use £land ones ;)

Is Paraffin the same as kerosene? In which case you get a gallon of it from any local fuel supplier for a few pounds it's often called 28 sec.