. .

Thread: Funny Stuff

  1. #1
    Something that made me laugh today . Post something that made you laugh



    Click image for larger version. 

Name:	speed cnc.PNG 
Views:	191 
Size:	294.6 KB 
ID:	22663
    project 1 , 2, Dust Shoe ...

  2. #2
    Cool ! kmh..

    What occurred was trying max-speed on steppers, == 5 years ago.
    No-load, just stepper.
    Nema 23, 3 Nm, 68 V PSU I made.
    BUT a centipede very good hw controller.
    Gecko 203V drives.

    Geckos fail at around 380 kHz, as I found out.. error out.
    38 khz full steps.
    190 revs/second.
    11.400 rpm.
    Takes about 3 secs to get to full speed..
    and sounds *exactly* like a jet engine spooling up.

    I was a Mig 21Bis assistant mechanic in the Finnish Air Force, for a year.

    So it was really funny, really cool, and I did not try higher.
    The torque was so low, a finger (yes i pressed the shaft) stopped the movement.

    I recall Marisss / gecko blew up a stepper at high rpm.
    The stepper rising turbine-type noise was really funny/impressive, if useless.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Spindle funny noise
    By Millone in forum Spindles & Drive Motors
    Replies: 7
    Last Post: 08-02-2018, 02:04 PM
  2. funny noise from steppers.
    By Davo242 in forum Gantry/Router Machines & Building
    Replies: 6
    Last Post: 09-03-2016, 07:31 PM
  3. funny movement on solidcam turning
    By eamo1978 in forum Solidworks
    Replies: 0
    Last Post: 23-06-2014, 08:16 AM
  4. Funny machining pics
    By oscar in forum Workshop & Equipment
    Replies: 3
    Last Post: 30-05-2013, 03:55 PM
  5. something quite funny
    By johngoodrich in forum Machine Discussion
    Replies: 4
    Last Post: 12-09-2011, 10:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •