Page 2 of 2 FirstFirst 12
  1. #11
    This company lists the correct collets near the bottom of the page -

    https://www.spline.nl/machines/icp.php#Collets

    I don't know if they are still trading or have stock but it's worth asking - again, found using Google and varying search terms!
    You think that's too expensive? You're not a Model Engineer are you? :D

  2. #12
    cheers found them waiting for reply for 2 weeks now but sk11 info is helpfull
    Last edited by Steve-m; 05-09-2017 at 07:04 PM.

  3. #13
    You'll have noticed that they list different collets for the 500 to the 1050 and it's the 1050 that's common with Kress?
    You think that's too expensive? You're not a Model Engineer are you? :D

  4. #14
    yes I wondered if the small kress was same, rapidly coming to think a ew11 china man spindle may be way forward, deciding which one, and finding a mount that matches with the 100mm T slots

    Steve

  5. #15
    If you know anyone who's handy with a lathe the could make you a nut and a collet or two.
    You think that's too expensive? You're not a Model Engineer are you? :D

  6. #16
    Quote Originally Posted by Steve-m View Post
    yes I wondered if the small kress was same, rapidly coming to think a ew11 china man spindle may be way forward, deciding which one, and finding a mount that matches with the 100mm T slots

    Steve
    Can you supply the sizes large and small end + length of the collet you want to match to the Kress I have a set of collets and nuts I could check.

    Or should I Google.

    Phill
    Last edited by phill05; 05-09-2017 at 07:39 PM. Reason: words added

  7. #17
    no I dont, just looking through flea bay now for a spindle that takes ew11 collets, trying to remember what the 3 phase converter ones are called

    Steve

  8. #18
    Quote Originally Posted by phill05 View Post
    Can you supply the sizes large and small end + length of the collet you want to match to the Kress I have a set of collets and nuts I could check.

    Or should I Google.

    Phill
    Ha Ha
    I did see a dimensions drawing some where will Google and see if i can find again #

    Steve

  9. #19
    Quote Originally Posted by Steve-m View Post
    Ha Ha
    I did see a dimensions drawing some where will Google and see if i can find again #

    Steve
    spent all evening looking through history and google cant find it again

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. Replies: 5
    Last Post: 29-09-2014, 02:42 PM
  3. Replies: 0
    Last Post: 13-11-2013, 07:50 PM
  4. Spindle lock mechanism for 2.2kW china spindle
    By Jonathan in forum Generic Chinese Spindles
    Replies: 8
    Last Post: 13-08-2012, 08:39 PM
  5. DIY Spindle - What type of bearings are best suited for a spindle.
    By 8iggles in forum Spindles & Drive Motors
    Replies: 18
    Last Post: 09-02-2011, 10:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •