1. Hi All,
    Does anyone have experience using an 80mm Insert cutter to face off brass or Ali sheets. I'm trying to improve the finish and would appreciate input on feeds, speeds and strategies. Only removing between 50 and 150um. Milling Cutter has 6 inserts. Hurco i20 machine. 10000rpm spindle but don't run this tool above 4000rpm. Solid machine, decent torquey spindle
    Cheers, Paul
    Paul Seddon

  2. #2
    on our vmc's I would run that at 5000rpm and between 1000-1200mm/min

  3. #3
    forgot to say make sure you are using polished aluminium grade tips

  4. Thanks very much John. Will try on monday. Will let you know how I get on.
    cheers, paul
    Paul Seddon

Similar Threads

  1. Face mill finish
    By Edward in forum Tool & Tooling Technology
    Replies: 24
    Last Post: 05-02-2017, 01:08 PM
  2. Hypertherm plasma cutter advice.
    By T0rnado69 in forum Plasma Table Machines
    Replies: 11
    Last Post: 17-06-2016, 08:53 PM
  3. fly cutter advice please
    By luke11cnc in forum Tool & Tooling Technology
    Replies: 13
    Last Post: 07-12-2014, 12:38 PM
  4. WANTED: Small pice of ali plate 80mm x 80mm x 17-20 mm
    By charlieuk in forum Items Wanted
    Replies: 2
    Last Post: 25-08-2014, 08:14 PM
  5. Front face DIY decals advice ..
    By Fivetide in forum Metal Finishing Techniques
    Replies: 9
    Last Post: 13-06-2013, 10:23 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •