Page 6 of 6 FirstFirst ... 456
  1. #51
    yes I fitted a laser pointer so I could trace the movements let it run on a couple of cycles it still stalled so sadly no noise issues as far as I know. sorry if I havent explained myself so well Ive been running backwards and forwards to the workshop all day trying various different things and I am a complete noob.

  2. #52
    it still stalled so sadly no noise issues as far as I know
    What make you think there is no noise issues?

    Have you tried just using the x axis with a cut and then the Y axis with a cut to see if any one of those stalls
    Last edited by Clive S; 14-10-2017 at 10:51 PM.
    ..Clive
    The more you know, The better you know, How little you know

  3. #53
    I mean it stalls with no cutting at all I thought you meant noise from the router. its so random, and intermittent I am now investigating the PC as this problem has control all over it. If this turns out to be ok I will look again at the movement, tomorrow will tell.

  4. #54
    Quote Originally Posted by woodworker View Post
    I mean it stalls with no cutting at all I thought you meant noise from the router. its so random, and intermittent I am now investigating the PC as this problem has control all over it. If this turns out to be ok I will look again at the movement, tomorrow will tell.
    Google EMI https://en.wikipedia.org/wiki/Electr...c_interference It is very common if the wires are not screened.
    ..Clive
    The more you know, The better you know, How little you know

  5. #55
    Its working after a complete computer rebuild new graphics card I have ran it for 2 days with not once did it make that awful sound in fact it ran for 3 hours constant today it didnt put a foot wrong so thank you everyone for the information and help, now how do I make money with it :).

  6. #56
    Quote Originally Posted by woodworker View Post
    now how do I make money with it :).
    Design and make things that people want to buy which no one else makes.

    Simples! ;-)
    You think that's too expensive? You're not a Model Engineer are you? :D

  7. #57
    Its working after a complete computer rebuild new graphics card I have ran it for 2 days without it making that awful sound in fact it ran for 3 hours constant today it didnt put a foot wrong so thank you everyone for the information and help, now how do I make money with it
    Last edited by woodworker; 4 Weeks Ago at 09:35 PM.

Page 6 of 6 FirstFirst ... 456

Similar Threads

  1. 3d carving oak
    By Mikeb in forum Woodwork Discussion
    Replies: 11
    Last Post: 24-03-2014, 10:22 AM
  2. V bit carving
    By Mikeb in forum Tool & Tooling Technology
    Replies: 4
    Last Post: 20-02-2014, 04:52 PM
  3. tools for 3d wood carving
    By chris in forum Marketplace Discussion
    Replies: 5
    Last Post: 18-01-2014, 04:23 AM
  4. 3d carving bits
    By drut in forum Tool & Tooling Technology
    Replies: 9
    Last Post: 04-07-2013, 01:03 AM
  5. Microcarve picture carving software
    By cnctoybox in forum CAD & CAM Software
    Replies: 0
    Last Post: 26-03-2012, 07:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •