1. #1
    Even with a decent basic kit build Prusa I3 clone like my Factory 3D.

    Just saying as it seems to have bypassed some ;-)

    - Nick
    Life is a learning and growing experience.

  2. #2
    What nylon are you printing? Its high time i start printing nylon also. Now that have mastered PLA<ABS<PETG
    project 1 , 2, Dust Shoe ...

  3. #3
    I've got a generic Nylon printing OK but Taulman Bridge is lovely and far more forgiving.
    Life is a learning and growing experience.

  4. #4
    Nylon prints very well as long as it is dry. As it sucks moisture in the print quality starts deteriorating.

    BTW, I have some of the best nylon you can print

    https://emvioeng.com/shop/3d-printin...ernylon-nylon/
    www.emvioeng.com
    Machine tools and 3D printing supplies. Expanding constantly.

  5. #5
    Quote Originally Posted by komatias View Post
    Nylon prints very well as long as it is dry. As it sucks moisture in the print quality starts deteriorating.

    BTW, I have some of the best nylon you can print

    https://emvioeng.com/shop/3d-printin...ernylon-nylon/
    +1 on moisture, 80C for four hours and store in/feed from a dry box.

    What advantages over Taulman Bridge does that Nylon have? It's 50% more expensive so it must have a very special USP.
    The only fault with Taulman Bridge that I can find is that it's a bit on the expensive side, I'd need a serious reason to spend 50% extra,

    - Nick
    Life is a learning and growing experience.

  6. #6
    I have digitized with a temp controller a kitchen oven that bought from boot sale :-) . Exactly for that purpose, drying filament. Though I store it always in plastic bag. And if somebody tells you that PETG does not drink water, it is not so. I know as I mainly print in PETG. And have to dry it.

    I dry all filaments i use at 60C.
    project 1 , 2, Dust Shoe ...

  7. #7
    I dry Nylon with the actual filament temperature at 80C
    I have some of those little LCD electronic humidity monitors in my storage/feed containers to indicate when the moisture absorbent material needs refreshing.
    Life is a learning and growing experience.

Similar Threads

  1. 3D printed Peristaltic Pump
    By cropwell in forum 3D Printing Machines
    Replies: 6
    Last Post: 26-09-2016, 09:40 AM
  2. 3D printed Homes and Limits bracket
    By cropwell in forum 3D Printing Machines
    Replies: 4
    Last Post: 16-03-2016, 10:32 PM
  3. 3D Printed Pop Pop Boat
    By TheGoodGuy in forum 3D Printing Machines
    Replies: 0
    Last Post: 09-07-2015, 10:40 AM
  4. Printed Circuit Boards manufacturer
    By stirling in forum General Electronics
    Replies: 9
    Last Post: 06-06-2012, 05:53 PM
  5. Milling Printed Circuit Boards - How To
    By Lee Roberts in forum Electronic Project Building
    Replies: 0
    Last Post: 28-08-2008, 10:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •