1. #1
    Hello guys,
    My story:
    I'm an enthusiastic of homemade builds since I crashed my first battery car to remove the motor to create a fan propeler to my lego construction @6year old.
    I had spend lots of time racing Motocross in Portugal, and I always made my bike maintenance, during my racing time I also studied Material engineering, that I finished the master degree in 2013.

    I enjoy to do some CAD modeling, Aluminium casting, 3D printing, and now I'm starting on the CNC world.

    The last project that I made was a CNC router, you can see the video here:

    I was using CNCzone, but it was very confusing...
    I want to continue the building and using of this CNC, do you have any suggestion in which forum should I start the thread?

    Thak you.

    My youtube channel: www.youtube.com/laranjas3
    My website(under construction): http://www.tailortech.pt

  2. #2
    Welcome to the forum

    Sounds like you have similar interests to the guys here. You can start a build thread in the Machines> DIY router builds. See the tabs at the top of the main page
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  3. #3
    Thank you,
    Will post in the recommended forum.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Surface Grinder - Elliott 618 - Any Good?
    By Chaz in forum Metalwork Discussion
    Replies: 2
    Last Post: 30-08-2018, 12:51 PM
  2. Belt Grinder 2x72" and 50x2000 mm
    By Boyan Silyavski in forum Metalwork Project Showcase
    Replies: 23
    Last Post: 08-03-2016, 06:17 AM
  3. Centerless grinder LOESER RPS 374 - in Europe
    By Grinder in forum Opportunities Available & Sought
    Replies: 1
    Last Post: 24-11-2014, 03:53 PM
  4. NEW MEMBER: 3d printing to CNC
    By AVRnj in forum New Member Introductions
    Replies: 27
    Last Post: 04-04-2013, 10:09 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts