Thread: Centroid Acorn CNC Controller
-
25-10-2017 #1
So, just came across this today:
http://www.centroidcnc.com/centroid_...ontroller.html
And, honestly, trying to figure out why everyone isn't freaking out about it? Seems like the answer to a lot of prayers in the DIY CNC world. What am I missing?
Regards,
Wallace
-
25-10-2017 #2
Ive been looking at this myself as I'm building a new machine and I really don't want to use mach 3 or 4. I should have stuck it out with eding cnc but this does look interesting.
-
25-10-2017 #3
I am just a happy hobbyist so take my opinion with a huge pinch of salt.
This did not look attractive to me because of gcode limitations and only 3 axis in cheapest software option.
Also the GUI does not look intuitive for me..
Im not using mach for my future machine, went for uccnc instead. :)
Skickat från min SM-N910C via Tapatalk
-
26-10-2017 #4
The two things that standout to me, are you need to add the cost of the software to do anything more than basic machining, and outputs/inputs are limited, with no obvious way to expand.
Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
26-10-2017 #5Seems like the answer to a lot of prayers in the DIY CNC world.Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
26-10-2017 #6
http://weihong.adcomma.cn/en/chanpin...160422/15.html
Enviado do meu iPhone usando o Tapatalk
-
27-10-2017 #7
That's fair - I may have overstated a bit. Also, I was thinking that this was a standalone controller similar to the DDCSV1.1, but now I see that it only works in conjunction with their software.
Still intriguing though. I really do not like depending on Windows PC for realtime functionality.
Regards,
Wallace
-
27-10-2017 #8
With the exception if Mach3 running on a parallel port, just about all hobby controls rely on their motion controller for the "real time" stuff. Windows is not an issue at all. I've been using machines costing well over $100,000 with Windows based controls for nearly 20 years, and I've never seen Windows cause an issue.
I would not want a machine control that didn't run on a PC, as you lose all of the advantages that having a PC at the machine brings.Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
27-10-2017 #9
Most of our new machines at work now run on windows based controls and I must admit that it does give a lot of options that were missing before. But on the other hand we still have a couple of old machines that run on plc's and they don't give us any problems at all with the control side of things. If something has gone wrong most of the time it has been a hardware issue.
-
27-10-2017 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Centroid Acorn DIY CNC controller
By NB70 in forum Control Hardware & SystemsReplies: 3Last Post: 15-11-2017, 02:14 PM -
Controller Cabinet
By cropwell in forum Workshop & EquipmentReplies: 2Last Post: 19-12-2015, 02:23 PM -
Ecostep 200 Controller
By cncland in forum Motor Drivers & ControllersReplies: 0Last Post: 14-11-2014, 07:43 PM -
TinyG CNC Controller in the UK?
By Nimbus in forum Marketplace DiscussionReplies: 0Last Post: 14-06-2013, 06:03 PM -
Controller Box
By M250cnc in forum Motor Drivers & ControllersReplies: 1Last Post: 21-11-2010, 01:34 AM
Bookmarks