. .
  1. #1
    Does anyone have any experience of this type of Chinese controller. I have just purchased a used Chinese 8x4 router with a Syntec controller. I use Alphacam V7 cad/cam, but do not have a post processor for it. Does anyone know where Ican find one? I understand the to get one written by Alphacam would be very very expensive. Thanks for any help. Geoff.

  2. #2
    Geoff,

    The machine you just bought sounds like it will be useful to have.
    If it helps, I found this on the CamBam forum, http://www.cambam.co.uk/forum/index.php?topic=4892.0
    Yarek said this, "I think I figure it out! it is just G4 P5000 after every tool change" referring to changes to a Mach 3 post for a Syntec controller.
    Keep in mind that members of the CamBam forum write post processors for free, provided they are given the details about what is required.
    Also, as you will no doubt be thinking, it could be better to replace the Syntec controller.
    Last edited by EddyCurrent; 31-10-2017 at 02:05 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  3. #3
    Thanks for that info Eddy. I do hope that I will not have to change the controller as it actually looks to be quite good. Time will tell. Geoff.

  4. #4
    hi , I have the Syntech EZ4 controller it is robust controller i wouldn't change it . i had same problem when i bought the machine with out manual but later on i manage to create one pp for my need through reading and asking in many forums specially cnczone and Artsoft forum there are plenty information regarding Syntech EZ4 i am using Art cam and inventor pro . if you can mange to open the pp from program file of your cad/cam file you will find the pp file (post Processor )and copy that one and try to study it and you can easily edit i have a bunch of them but not Alpha cam . if you want to change to art cam or vectric i can e mail you .it is not something you pay for pp .

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE: Eding cnc controller
    By Web Goblin in forum Items For Sale
    Replies: 4
    Last Post: 01-08-2016, 03:31 PM
  2. TinyG CNC Controller in the UK?
    By Nimbus in forum Marketplace Discussion
    Replies: 0
    Last Post: 14-06-2013, 06:03 PM
  3. UHU Servo Controller
    By gbar in forum Stepper & Servo Motors
    Replies: 4
    Last Post: 11-05-2012, 12:12 PM
  4. FOR SALE: Controller Box for sale
    By lateAtNight in forum Items For Sale
    Replies: 12
    Last Post: 04-03-2012, 10:17 AM
  5. Controller Box
    By M250cnc in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 21-11-2010, 01:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •