. .
  1. #1
    Hi Guys

    This thread does not relate to a cnc but a conveyor belt on a non-CNC based machine. I am after a device that will allow me to control the speed of a converyor belt, i.e. some speed controler that I can adjust so when I use the turn rang of the not the speed will only go from so slow ot so fast.

    Any help much appreciated

    Steve

    https://www.ebay.co.uk/itm/NEW-120W-...19.m1438.l2649

  2. #2
    You don't mention what size the motor is, this is my goto place for (quality) drives; https://inverterdrive.com/group/DC-Thyristor-Drive/
    Last edited by EddyCurrent; 16-11-2017 at 11:31 AM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  3. #3
    Hi Eddy,

    Cheers very much for the help mate. No I did not put info on the DC motor as I dont know it! I think on my variable speed drive the Potentiometer could be faulty as it turns without stoping or clicking or should I say it just keeps turning round and round. It is only 3 wires and about £4 so I will try that. Tar very much for the link I will keep that in mind.

    Tar very much

    Steve

  4. #4
    https://www.ebay.co.uk/itm/373640367...QAAOSwlOJfmUht
    I managed to run a lathe spindle on one of these

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Spindle Speed Controller Question
    By thomashomer1986 in forum Motor Drivers & Controllers
    Replies: 38
    Last Post: 31-10-2016, 06:02 AM
  2. Spindle Speed Control
    By cncJim in forum Spindles & Drive Motors
    Replies: 15
    Last Post: 18-06-2013, 07:53 PM
  3. Speed control
    By Saracen in forum Spindles & Drive Motors
    Replies: 2
    Last Post: 29-12-2012, 02:18 PM
  4. How to control fan speed?
    By Smiler in forum General Electronics
    Replies: 5
    Last Post: 28-07-2011, 09:48 AM
  5. Interact series 2 speed controller problem
    By fastcarl in forum Machine Discussion
    Replies: 1
    Last Post: 25-01-2011, 09:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •