Page 1 of 2 12 LastLast
  1. #1
    HI
    a while ago I built a 3 axis system using a 10" x y table and a water cooled variable speed spindle. all the parts came from cnc4u except the x y table.
    it all works and I made a couple of projects but ive gone back to manual so its all up for grabs if anyone's interested.
    contact me if you are and I can list all the components
    cost a bl**dy fortune to build!
    cheers
    carl

  2. #2
    Could you pm me with the list and most essentially the price if you would please.

  3. #3
    Hi,
    sorry its taken so long to fill in the details

    control unit mounted and wired in a funky acrylic clear box, comes with all the leads.
    I have a licensed copy of mach3 not sure how to transfer the license tho

    cnc4u part codes
    CP0-10V breakout board
    UC300-USB
    CWD556 stepper controller 3
    36V 11A 400Watt PSU
    plus relay board to switch mains to control water pump, spindle & 1 spare. emergency stop no volt switch and z axis stop jack

    the xy table is made by NEAT, it is solid billet ali and weighs about 15kgs, it has 8" travel, the table is 10" square. The lead screws have a 2mm pitch. All the bearings are adjustable for backlash, at the opposite end to the stepper motor there is a dual ball bearing configuration that you pre load them against each other

    open to offers


    some pictures I hope

    carl
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20171220_174237.jpg 
Views:	83 
Size:	546.7 KB 
ID:	23444   Click image for larger version. 

Name:	20171220_174227.jpg 
Views:	69 
Size:	562.7 KB 
ID:	23443   Click image for larger version. 

Name:	20171220_174212.jpg 
Views:	76 
Size:	603.0 KB 
ID:	23442   Click image for larger version. 

Name:	20171220_174433.jpg 
Views:	75 
Size:	632.3 KB 
ID:	23445   Click image for larger version. 

Name:	20171220_174537.jpg 
Views:	66 
Size:	636.5 KB 
ID:	23446   Click image for larger version. 

Name:	20171220_174617.jpg 
Views:	74 
Size:	606.5 KB 
ID:	23447   Click image for larger version. 

Name:	20171220_175353.jpg 
Views:	83 
Size:	824.0 KB 
ID:	23448   Click image for larger version. 

Name:	20171220_175402.jpg 
Views:	69 
Size:	700.9 KB 
ID:	23449   Click image for larger version. 

Name:	20171220_175410.jpg 
Views:	79 
Size:	897.5 KB 
ID:	23450   Click image for larger version. 

Name:	20171220_175421.jpg 
Views:	68 
Size:	845.6 KB 
ID:	23451  

    Click image for larger version. 

Name:	20171220_175449.jpg 
Views:	80 
Size:	718.6 KB 
ID:	23452   Click image for larger version. 

Name:	20171220_180403.jpg 
Views:	71 
Size:	809.8 KB 
ID:	23453  

  4. #4
    Can I assume you have lost interest in selling this?

  5. #5
    this is the spindle mounted on a zero backlash ballscrew. It comes with a water pump and variable speed controller. all bought from cnc4u as a system so designed to work together. also a set or er20 ncollets, some unused.
    It has a Microsoft webcam with upgraded optics for zero location that works with mach3
    z axis limit switch.
    It all works fine and has hardly been used
    open to offers
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20171228_203817.jpg 
Views:	63 
Size:	725.5 KB 
ID:	23501   Click image for larger version. 

Name:	20171228_203845.jpg 
Views:	52 
Size:	637.0 KB 
ID:	23502   Click image for larger version. 

Name:	20171228_203916.jpg 
Views:	51 
Size:	627.8 KB 
ID:	23503   Click image for larger version. 

Name:	20171228_203934.jpg 
Views:	53 
Size:	774.9 KB 
ID:	23504   Click image for larger version. 

Name:	20171228_204008.jpg 
Views:	40 
Size:	533.0 KB 
ID:	23505  

  6. #6
    Quote Originally Posted by emlclcy View Post
    this is the spindle mounted on a zero backlash ballscrew. It comes with a water pump and variable speed controller. all bought from cnc4u as a system so designed to work together. also a set or er20 ncollets, some unused.
    It has a Microsoft webcam with upgraded optics for zero location that works with mach3
    z axis limit switch.
    It all works fine and has hardly been used
    open to offers
    sold

  7. #7
    200 for the x y table + controller
    Last edited by emlclcy; 29-12-2017 at 02:03 PM.

  8. #8
    Quote Originally Posted by emlclcy View Post
    200 for the x y table + controller
    Where about are you located? I am interested in the controller.

    Thanks

    Peter

  9. #9
    Basingstoke

  10. #10
    Ok PM sent

Page 1 of 2 12 LastLast

Similar Threads

  1. RFQ: Semi automatic welding system Linear beam control system
    By richway in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 24-01-2017, 07:54 PM
  2. Setting up "System 45" 3 axis unit by DIYCNC
    By StevenT in forum LinuxCNC/EMC
    Replies: 2
    Last Post: 15-10-2014, 02:22 PM
  3. Gerber system 48
    By martin54 in forum Milling Machines, Builds & Conversions
    Replies: 67
    Last Post: 13-09-2013, 11:35 AM
  4. Precision metal processing (3 axis, 5 axis, 7 axis) OEM
    By 7AxisCNC in forum Manufacturer News
    Replies: 0
    Last Post: 17-05-2011, 01:04 PM
  5. Has Anybody used one of these G540 4-axis system
    By HS93 in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 05-03-2011, 10:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •