1. #1
    My Denford Triac with Fanuc OM control has developed a Tool changer fault today, when tool changing the carousel goes past the tool pocket requested and keeps spinning until it times out.

    I have adjusted the sensor that makes contact with geneva wheel and put multimeter on the block that the sensor is connected to, I get 0 then 5v(or just under) repeatedly as the wheel turns.

    If I use the manual ATC rotate buttons on the control, the wheel turns twice and indexes round one position but if I request an T# M6 within a program or MDI it just spins round.

    Anyone got any idea what the problem might be?

  2. #2
    Has anyone got a wiring diagram for the Denford triac with fanuc OM control?

  3. #3
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 19 Hours Ago Has been a member for 9-10 years. Has a total post count of 1,831. Received thanks 192 times, giving thanks to others 5 times.
    It sounds like a problem with the controller ladder, rather than a sensor problem, given it indexes correctly with the buttons.

    These drawings? http://www.denfordata.com/bb/viewtopic.php?f=15&t=2651
    There are quite a few Fanuc downloads in the download board on the denford forum.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  4. #4
    Thanks for that, looked all over that forum but somehiw missed the downloads section. Got the fanuc om service manual which has electrical diagrams and ladder diagram. You are right when using the manual index buttons the sensor flashes twice on the ladder but when calling an m6 the sensor doesnt register the rotations. Any idea why this might have changed suddenly?

Similar Threads

  1. FOR SALE: Denford Triac PC inc Denford table plus chucks, and Denford CD software etc
    By Piero franchi in forum Items For Sale
    Replies: 8
    Last Post: 14-02-2017, 04:47 PM
  2. FOR SALE: Denford Triac + Denford Orac + other stuff
    By Clive S in forum Items For Sale
    Replies: 6
    Last Post: 06-02-2017, 11:47 PM
  3. FOR SALE: Denford Triac CNC PC
    By ricey3 in forum Items For Sale
    Replies: 6
    Last Post: 10-01-2017, 01:39 PM
  4. Denford Triac VMC
    By fidia in forum Milling Machines, Builds & Conversions
    Replies: 6
    Last Post: 19-08-2016, 08:18 AM
  5. WANTED: Denford Triac
    By edwardsjc in forum Items Wanted
    Replies: 13
    Last Post: 20-08-2012, 08:17 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •