. .
  1. #1
    65mm 1.5kw water cooled 4 bearing spindle with 4 connection pins , or with earth
    one vfd
    one 3foot or 900 ish mm wide bosch Rexroth 20-145mm linear gantry
    one 20 145 Rexroth linear doofer that gives me 50mm
    one plate to bolt the z to the y
    one pair of Rexroth rails and 4 bearings about 1200 - wide ones
    one 16 or 20 - 5mm pitched screw nut and bearings
    motor mounts Rexroth 145 to Panasonic minas / Rexroth ' yaskawa motors
    65mm spindle mount to mount to the z

    90 by 90 legged bosch Rexroth 45/90 table about 900mm high
    will buy back all that I had and sold a few years ago if you havn't used it........

    thanks

    oh and someone to mill me some gantry ends to take a Rexroth 20-145, I want them to look realy cool though
    i.e. they aren't going to be super tall - I want to build a sheet cutting cnc - or a plotter if you will, need not have to cut more than an inch - so want the ends milled from 40mm stock, and real pleasing to the eye - recessed, really worked
    Last edited by nobby; 06-12-2017 at 12:40 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. List of CAD/CAM Software
    By Mad Professor in forum CAD & CAM Software
    Replies: 72
    Last Post: 28-11-2018, 06:27 PM
  2. Replies: 2
    Last Post: 21-09-2017, 06:12 PM
  3. Long bits/endmills
    By dcrowder in forum Machine Discussion
    Replies: 4
    Last Post: 24-03-2016, 10:18 AM
  4. Replies: 0
    Last Post: 24-09-2014, 09:57 AM
  5. Replies: 0
    Last Post: 10-03-2014, 04:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •