Page 1 of 2 12 LastLast
  1. #1
    Is anyone knocking out rotating nut fixtures for ballscrews RM2510???

    Would be interested in a price for 2 off.


    If you're reading this and you don't make them but know someone that does if you could pass on a name that would be great.

    cheers,

    paul

  2. #2
    Quote Originally Posted by PaulP View Post
    Is anyone knocking out rotating nut fixtures for ballscrews RM2510???

    Would be interested in a price for 2 off.


    If you're reading this and you don't make them but know someone that does if you could pass on a name that would be great.

    cheers,

    paul
    Jonathan on here has made a few a while back, I think he may still have some partly made so give him a PM.
    ..Clive
    The more you know, The better you know, How little you know

  3. #3
    Cheers Clive,

    I tried emailing Johnathan a few days ago but didn't hear anything. I noticed his last activity date was in august so not sure if he's left or on a break from it all.

    If anyone else is knocking these out I'd be glad to hear from them.

    Cheers,

    p

  4. #4
    Quote Originally Posted by PaulP View Post
    Is anyone knocking out rotating nut fixtures for ballscrews RM2510???

    Would be interested in a price for 2 off.


    If you're reading this and you don't make them but know someone that does if you could pass on a name that would be great.

    cheers,

    paul
    Hi

    I'm also interested in sourcing rotating nut fixtures for ballscrews RM25...

    Anyone up for it?

    Cheers

    Mark

  5. #5
    Me too for 1605/1604
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

  6. #6
    Boys,

    if we can get the numbers, I could assist in getting this off the ground. I already have a compact and economical solution in mind.
    My ballscrew suppliers are easy when it comes to low quantity special nut shapes so that will not be an issue.

    If you wanted to go with the bog standard screws, and ballnuts that can also be accommodated.

    The question for you will be what motor sizes you are likely to want.
    https://emvioeng.com
    Machine tools and 3D printing supplies. Expanding constantly.

  7. #7
    3nm would be a good start point and I''m sure 8nm and 12nm would be sellers to.

    I'm a 3nm kind of guy
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

  8. #8
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 12 Hours Ago Has been a member for 9-10 years. Has a total post count of 2,147. Received thanks 236 times, giving thanks to others 5 times.
    I think Komatias meant frame size, not torque ;-)
    I would expect a choice between Nema23, 34, and 60/80 servo sizes would cover most bases.

    Until Komatias posted, I was thinking of making some of these, but I won't step on his toes.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  9. #9
    Quote Originally Posted by m_c View Post
    I think Komatias meant frame size, not torque ;-)
    I would expect a choice between Nema23, 34, and 60/80 servo sizes would cover most bases.

    Until Komatias posted, I was thinking of making some of these, but I won't step on his toes.
    If it gets me 3 rotating ballnut fixtures you can dance on my grave lol.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

  10. #10
    My personal requirement would be NEMA 34 frame size...

Page 1 of 2 12 LastLast

Similar Threads

  1. Rotating Ballnut - design ideas
    By Jonathan in forum Open Source Designs & Plans
    Replies: 174
    Last Post: 15-02-2018, 08:48 AM
  2. Rotating Ball nut
    By drumsticksplinter in forum Lead Screws, Nuts & Supports
    Replies: 27
    Last Post: 28-08-2016, 04:46 PM
  3. Noob Wondering About Rotating Mchinery
    By magicniner in forum General Discussion
    Replies: 11
    Last Post: 26-03-2016, 03:23 PM
  4. Rotating ball nut
    By D-man in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 21-03-2015, 07:39 AM
  5. Rotating Ballnut Design MK3
    By Jonathan in forum Linear & Rotary Assemblies
    Replies: 0
    Last Post: 15-12-2013, 12:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •