1. Hi all,

    thought I'd share with you this relic from a different era..

    I work with a machine shop that has a 1970 Turret lathe, Herbert, Model 2D, 6-turret, with peg board control, bar feed and hydraulics feed. This pegboard must be one of the early forms of CNC, the pegs are resistors that allow you to program a sequence, it's so old school that I tell this guy this should be in a museum!

    He uses it sometimes, works all right though it could use some hydraulics servicing and general tidying up. Do you guys think it's worth updating it? Does it have any value as it is?

    Click image for larger version. 

Name:	2017-12-11 14.02.47.jpg 
Views:	38 
Size:	311.9 KB 
ID:	23385
    Click image for larger version. 

Name:	2017-12-11 14.03.03.jpg 
Views:	43 
Size:	405.7 KB 
ID:	23386
    Click image for larger version. 

Name:	2017-12-11 14.03.30.jpg 
Views:	34 
Size:	196.7 KB 
ID:	23384

  2. #2
    Is it one of the early EMI-MEC Nichols controls using a Uniselector or a later version with the array of 48v Dc relays replacing the uniselector ??

    if I remember correctly the electronic dwell timers us the 2N2046
    unijunction transistor

    the yellow programing pins have a diode inside
    at each step multiple pins can be plugged in to power several relays and solenoid valves
    the diodes form a diode "OR" gate to prevent the +48V from one step of uniselector (or later sequencing circuit) back feeding to other step outputs

    John

Similar Threads

  1. BUILD LOG: Build Log - Herbert
    By nairepooc in forum DIY Router Build Logs
    Replies: 43
    Last Post: 07-09-2016, 05:43 PM
  2. Mach lathe spindle speed control
    By GeoffV in forum Artsoft Mach
    Replies: 7
    Last Post: 21-05-2014, 08:34 AM
  3. Denford Starturn Turret
    By Leadhead in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 7
    Last Post: 11-09-2013, 08:36 AM
  4. Lathe Control Repair Notts/Derbys
    By Chas in forum General Discussion
    Replies: 12
    Last Post: 04-01-2011, 03:10 AM
  5. Honey I blew up the mini lathe speed control board
    By HankMcSpank in forum General Electronics
    Replies: 6
    Last Post: 04-03-2010, 07:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •