. .
Page 1 of 2 12 LastLast
  1. #1
    Hello everyone

    I purchased a CNC router 1325 From china.

    I want experimented users to advise me what tests can be the best to know that the machine gives good results and work properly.

    It appear very good but I want to ensure.

    The machine is still on factory and I want to ask them to test it more.

    Any other advises are welcome. ( I don't want to have troubles after having it)




    thank you

  2. #2
    When you say test it, test what, do you mean the accuracy when cutting say a circle for example

  3. #3
    Thank you Kev2960 for your replay

    I want to ask video tests from the manufacturer and I have no Idea what is the best tests that lets me judge that the machine is good and accurate and give best results.

    Also what are things that can you advise me to ask about, before shipping the machine?

    Thank you

  4. #4
    What do you intend to use the machine for

  5. #5
    Quote Originally Posted by Kev2960 View Post
    What do you intend to use the machine for
    In first place for advertising.

  6. #6
    can't you just send the company one of your products to be cut

  7. #7
    Is it possible to send me a link to their web site

  8. #8
    Quote Originally Posted by cnclover View Post
    Hello everyone

    I purchased a CNC router 1325 From china.

    I want experimented users to advise me what tests can be the best to know that the machine gives good results and work properly.

    It appear very good but I want to ensure.

    The machine is still on factory and I want to ask them to test it more.

    Any other advises are welcome. ( I don't want to have troubles after having it)




    thank you
    Cut a square check it looks square and measure it.
    Cut a circle and check it looks circular and measure it.

    Repeat the above with the materials and depths of cut the machine is advertised to be capable of and ensure the results look neat and measure correctly.
    You think that's too expensive? You're not a Model Engineer are you? :D

  9. #9
    Kev2960

    yes with pleasure.

    The company is OMNITECH.

    It seems good.

    http://www.omni-cnc.com
    Last edited by cnclover; 19-12-2017 at 12:08 AM.

  10. #10
    Quote Originally Posted by magicniner View Post
    Cut a square check it looks square and measure it.
    Cut a circle and check it looks circular and measure it.

    Repeat the above with the materials and depths of cut the machine is advertised to be capable of and ensure the results look neat and measure correctly.
    Thank you very much

    I will do.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. First engraving test :)
    By Davek0974 in forum Gantry/Router Machines & Building
    Replies: 24
    Last Post: 24-04-2016, 02:35 PM
  2. Chines CnC ebay
    By amxen in forum General Discussion
    Replies: 11
    Last Post: 01-02-2015, 03:46 PM
  3. Test of new vinyl cutter
    By evildrome in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 17-01-2011, 12:25 AM
  4. Test cutting materials
    By Kai in forum General Discussion
    Replies: 6
    Last Post: 05-12-2010, 10:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •