1. #1
    In our attempt to make this version of BOBcad-CAM work we have run into an issue. We need to chamfer the bottom side of a through hole in BOBcad-CAM. Most of our drawings are done through 2D in the program and we need to know a couple things on this.

    1. How do you program a bottom chamfer tool using a Multi-Master top and bottom chamfer tool in BobCAD V25? Tool information at http://www.iscar.com/eCatalog/item.a...app=0&GFSTYP=M

    2.Is there a way to program bottom chamfers into through holes using 2D drawings or would we need to use solid images to achieve this?

  2. #2
    You are asking V25 to do something not supported at it's release but it should be possible.

    You can do it with 2D geometry with a little ingenuity, I use a thread milling operation with one turn and near-zero pitch to generate code to cut a groove at the bottom of a blind hole, this gives you the lead-in and lead-out to get in and out of the hole clearing the cutter, you can edit the Z move round the one turn out manually fairly easily if you need to.

    If you need more help you can give me a file to put an example into for you,
    Regards,
    Nick
    Last edited by magicniner; 3 Weeks Ago at 11:11 AM.
    You think that's too expensive? You're not a Model Engineer are you? :D

Similar Threads

  1. Is having a wobbly bottom normal? Drill Vice...
    By Dangle_kt in forum Workshop & Equipment
    Replies: 9
    Last Post: 13-01-2017, 04:39 PM
  2. BUILD LOG: Worlds Greenest Stool Bottom CNC
    By magicniner in forum DIY Router Build Logs
    Replies: 17
    Last Post: 24-03-2016, 02:27 PM
  3. v bit flat bottom
    By universally in forum Tool & Tooling Technology
    Replies: 4
    Last Post: 01-10-2015, 10:25 PM
  4. Replies: 2
    Last Post: 07-12-2013, 04:13 PM
  5. Chamfer Feed & Speed - G-Wizard?
    By Tenson in forum Computer Software
    Replies: 4
    Last Post: 05-02-2013, 07:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •